{"product_id":"lenox-4022nec1464-band-saw-blade-coil-1-4-in-100-ft","title":"Lenox 4022NEC1464 Band Saw Blade Coil 1\/4 in 100 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe LENOX 4022NEC1464 is a band saw blade coil stock designed for continuous-length cutting applications in metal fabrication, pipe work, and general trade use. The coil measures 100 feet in length and 1\/4 inch in width with a blade thickness of 0.025 inches, making it well-suited for tight-radius contour cuts on a variety of materials. The carbon steel construction with a hard back provides consistent tracking and structural rigidity under load. At 10 teeth per inch with a raker set and constant pitch, this blade delivers a balanced combination of cut speed and surface finish. Licensed trades and fabricators cut blades to custom lengths from the coil for site-specific applications.\u003c\/p\u003e\u003cp\u003eThis coil stock is intended for use in band saw machines that accept 1\/4-inch blades. It is a practical solution for shops and field teams that require on-demand blade lengths rather than pre-cut, fixed-length blades. The contour-cutting capability makes it applicable to curved or irregular profiles in metalworking, plumbing rough-in, and mechanical contracting environments where material shapes vary. The 100-foot coil supports high-volume cutting operations or multiple blade fabrications from a single stock unit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4 inch blade width suitable for tight-radius and contour cutting operations\u003c\/li\u003e\n\u003cli\u003e100-foot coil length allows custom blade sizing from a single stock unit\u003c\/li\u003e\n\u003cli\u003eCarbon steel construction with hard back for rigidity and consistent tracking\u003c\/li\u003e\n\u003cli\u003e10 TPI constant pitch with raker set for balanced cut rate and finish\u003c\/li\u003e\n\u003cli\u003eStraight tooth form with toothed cutting edge for clean material removal\u003c\/li\u003e\n\u003cli\u003eBlade thickness of 0.025 inches supports standard 1\/4-inch band saw guides\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for band saw machines that accept 1\/4-inch wide blade stock. Verify blade thickness and tooth pitch requirements against your specific machine specifications before cutting and welding blades to length.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBlade cutting and welding should be performed by a qualified technician using a blade welder appropriate for carbon steel stock. Disconnect and lock out the band saw from its power source before installing or changing blades. Ensure blade guides, thrust bearings, and tension settings are adjusted to the 1\/4-inch width specification per the machine manufacturer guidelines. Wear cut-resistant gloves when handling coil stock, as the toothed edge presents a laceration hazard during uncoiling and cutting.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Length\u003c\/strong\u003e: 100 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Hard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 4022NEC1464\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51542479634738,"sku":"4022NEC1464","price":188.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5cfae3e0188ec683d73a4c90f3e1f111.jpg?v=1785901431","url":"https:\/\/voomisupply.com\/products\/lenox-4022nec1464-band-saw-blade-coil-1-4-in-100-ft","provider":"Voomi Supply","version":"1.0","type":"link"}