{"product_id":"lenox-39666clb103050-bandsaw-blade-10-ft-4-6-tpi-bi-metal","title":"Lenox 39666CLB103050 Bandsaw Blade 10 Ft 4-6 Tpi Bi-metal","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe LENOX 39666CLB103050 is a welded bi-metal bandsaw blade designed for continuous cutting operations on metal-cutting bandsaws. The blade runs 10 feet in length and 3\/4 inch wide with a 0.035-inch thickness, and features a variable-pitch tooth form at 4 to 6 TPI. The M42 high speed steel tooth material provides heat and wear resistance during demanding cuts. A Vari-Raker tooth set combined with a positive rake angle reduces vibration and extends blade life across a range of material thicknesses. Licensed HVAC, plumbing, and mechanical trades along with metal fabricators rely on this blade for flush and contour-free straight cuts in production and service environments.\u003c\/p\u003e\u003cp\u003eThis blade is suited for use on horizontal and vertical metal-cutting bandsaws in both shop and field service settings. Its variable pitch tooth form makes it effective across a wide cross-section of material types, including thin-wall tubing, structural shapes, solid bar stock, and plate. Typical applications include cutting alloy steel, carbon steel, stainless steel, tool steel, structural steel, aluminum, and other non-ferrous metals. The Classic series design targets medium-duty to heavy-duty cutting cycles where consistent kerf quality and long blade life are priorities.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBi-metal construction with M42 high speed steel teeth bonded to a spring steel back for flexibility and edge retention\u003c\/li\u003e\n\u003cli\u003eVariable pitch tooth form at 4 to 6 TPI reduces harmonic vibration and chatter during the cut\u003c\/li\u003e\n\u003cli\u003eVari-Raker tooth set promotes efficient chip evacuation and consistent surface finish\u003c\/li\u003e\n\u003cli\u003ePositive rake angle improves cutting aggressiveness on harder alloys and stainless steel grades\u003c\/li\u003e\n\u003cli\u003eKerf width of 0.058 inches minimizes material loss per cut\u003c\/li\u003e\n\u003cli\u003eWelded construction provides a consistent joint suitable for high-cycle production use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a replacement or spare blade for metal-cutting bandsaws accepting a 10-foot blade loop, 3\/4-inch wide by 0.035-inch thick. Confirm your saw wheel diameter and blade guide spacing against these dimensions before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBlade installation should be performed by a qualified technician familiar with bandsaw equipment. Disconnect and lock out power to the saw before removing the existing blade or mounting the new one. Verify blade tension according to the saw manufacturer specifications before making a cut, as both over-tensioning and under-tensioning reduce blade life and cut quality. Wear cut-resistant gloves when handling the blade loop.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 4 to 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Vari-Raker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.058 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed, Milled, Variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Structural Steel, Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.7875 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 39666CLB103050\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51543635886386,"sku":"39666CLB103050","price":94.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/599e20776736986b01b7ffd4a5083314_87f1bdc1-3f23-4046-bf93-1718790a2d70.jpg?v=1785921191","url":"https:\/\/voomisupply.com\/products\/lenox-39666clb103050-bandsaw-blade-10-ft-4-6-tpi-bi-metal","provider":"Voomi Supply","version":"1.0","type":"link"}