{"product_id":"lenox-36829mab31140-welded-bandsaw-blade-18-tpi","title":"Lenox 36829MAB31140 Welded Bandsaw Blade 18 Tpi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe LENOX 36829MAB31140 is a welded bi-metal bandsaw blade engineered for continuous cutting performance in metal fabrication and industrial shop environments. The blade measures 44.875 inches in length and 0.5 inches in width, with a 0.02-inch thickness and an 18 TPI constant pitch configuration. The cutting edge combines a high speed steel M42 tooth with a spring steel back, delivering the flexibility needed to resist fatigue on contour cuts while maintaining edge hardness on tough workpieces. Tooth set is wavy, which reduces kerf load and vibration during the cut. Kerf width is 0.037 inches. This blade is installed by machinists, fabricators, and maintenance trades using vertical or horizontal bandsaw equipment.\u003c\/p\u003e\u003cp\u003eThis blade is suited for cutting a wide range of materials, including alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, non-ferrous metals, and wood. The 18 TPI pitch and wavy tooth set make it particularly effective for thinner-section workpieces where tooth engagement and surface finish matter. The M42 high speed steel tooth material handles elevated cutting temperatures without losing hardness, making this blade a practical choice in production settings where the saw runs extended cycles. Contour cutting is supported by the blade geometry.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBi-metal construction: M42 high speed steel teeth bonded to a spring steel back for durability and flex resistance\u003c\/li\u003e\n\u003cli\u003e18 TPI constant pitch with wavy tooth set reduces vibration and controls chip load\u003c\/li\u003e\n\u003cli\u003eToothed and milled cutting edge for consistent surface finish\u003c\/li\u003e\n\u003cli\u003eKerf width of 0.037 inches minimizes material loss per cut\u003c\/li\u003e\n\u003cli\u003eCompatible with a broad material range including stainless steel, aluminum, carbon steel, and tool steel\u003c\/li\u003e\n\u003cli\u003eStraight tooth form with no rake angle suits general-purpose metal cutting at standard feed rates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit welded bandsaw blade for vertical and horizontal bandsaws accepting a 0.5-inch wide blade in the 44.875-inch loop length.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBandsaw blade installation should be performed by qualified personnel following the saw manufacturer's service procedures. Disconnect and lock out power to the bandsaw before removing or installing any blade. Verify wheel diameter, blade guide spacing, and blade tension settings are within the saw manufacturer's specifications before operating. Wear cut-resistant gloves when handling the blade, as tooth edges are sharp during installation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 44.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.02 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.037 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Wavy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: No Angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed, Milled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Structural Steel, Tool Steel, Wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36829MAB31140\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51539514523954,"sku":"36829MAB31140","price":51.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/23c1e540616d5c66c15b1332c11b8890.jpg?v=1785842322","url":"https:\/\/voomisupply.com\/products\/lenox-36829mab31140-welded-bandsaw-blade-18-tpi","provider":"Voomi Supply","version":"1.0","type":"link"}