{"product_id":"lenox-27429rpb134115-bandsaw-blade-162-in-3-4-tpi-bi-metal","title":"Lenox 27429RPB134115 Bandsaw Blade 162 in 3-4 Tpi Bi-metal","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe LENOX 27429RPB134115 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in industrial and fabrication environments. Measuring 162 inches in total length and 1-1\/4 inches wide, this blade features a variable-pitch tooth form with a 3 to 4 TPI range that helps reduce vibration and harmonic resonance during cutting. The M42 high-speed steel tooth tips are bonded to a spring steel back, combining edge retention with fatigue resistance. At 0.042 inches thick with a kerf width of 0.070 inches, the blade delivers controlled cuts with minimal material loss. Licensed millwrights, maintenance technicians, and metal fabricators are the primary installers and users of this blade type.\u003c\/p\u003e\u003cp\u003eThis blade is designed for straight and structural cutting on horizontal and vertical bandsaw machines sized to accept a 162-inch blade. It is suited for cutting ferrous metals, structural steel, pipes, solid bar stock, and similar hard materials in production shops, maintenance facilities, and fabrication yards. The variable pitch tooth pattern makes it a practical choice when cutting a range of stock sizes without changing blades. Contour cutting is not an intended application for this blade.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 high-speed steel teeth for extended cutting life in ferrous and hard metals\u003c\/li\u003e\n\u003cli\u003eVariable-pitch 3 to 4 TPI tooth form reduces vibration and improves surface finish\u003c\/li\u003e\n\u003cli\u003eVari-Set tooth set pattern distributes cutting load and resists blade deflection\u003c\/li\u003e\n\u003cli\u003eSpring steel back provides flexibility and fatigue resistance over extended run time\u003c\/li\u003e\n\u003cli\u003e0.042-inch blade thickness with 0.070-inch kerf for efficient material removal\u003c\/li\u003e\n\u003cli\u003ePositive rake angle improves chip evacuation and cutting aggression on dense stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for bandsaw machines that accept a 162-inch welded blade with a 1-1\/4-inch width. Verify your machine's blade length specification, wheel diameter, and guide clearance before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBlade installation and tensioning should be performed by a qualified technician familiar with bandsaw equipment. Always disconnect power to the saw and release blade tension fully before removing or installing a blade. Use appropriate blade tension settings as specified by the saw manufacturer for the blade width and material being cut. Inspect blade guides, thrust bearings, and wheel tires for wear before mounting a new blade.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 162 inches (13 feet 6 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.042 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.070 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 3 to 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Vari-Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: RX Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 27429RPB134115\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51544443388210,"sku":"27429RPB134115","price":146.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/48b633844e245d347d3bf6926d2f9685_3670dc7b-37fb-4ce5-abc7-595ddb37d253.jpg?v=1785926691","url":"https:\/\/voomisupply.com\/products\/lenox-27429rpb134115-bandsaw-blade-162-in-3-4-tpi-bi-metal","provider":"Voomi Supply","version":"1.0","type":"link"}