{"product_id":"lenox-19903rpb165030-bi-metal-bandsaw-blade-2-3-tpi","title":"Lenox 19903RPB165030 Bi-metal Bandsaw Blade 2-3 Tpi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 19903RPB165030 is a welded bi-metal bandsaw blade from the RX Plus series, designed for demanding metal-cutting applications in fabrication shops and on job sites. The blade measures 16 feet 6 inches in length and 1-1\/2 inches in width with a 0.05-inch thickness. The cutting edge runs at a variable pitch of 2 to 3 TPI using a Vari-Set tooth set, which helps reduce vibration and improve chip evacuation during cuts. The tooth material is M42 high speed steel, bonded to a spring steel back, making this blade well suited for cutting a wide range of metals including alloy steels and stainless. Licensed HVAC and mechanical contractors, pipefitters, and metal fabricators are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis blade is intended for use on horizontal and vertical bandsaw machines that accept a 16 foot 6 inch loop blade with a 1-1\/2 inch width. The variable pitch tooth form is effective on structural shapes, solid bar stock, tubing, and bundled materials where consistent chip load across varying cross-sections is required. The RX Plus series targets production-level cutting environments where blade life and consistent performance under continuous use are priorities. It is not designed for contour or radius cutting.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction with M42 high speed steel teeth bonded to a spring steel back for extended blade life\u003c\/li\u003e\n  \u003cli\u003eVariable pitch 2 to 3 TPI with Vari-Set tooth set reduces vibration and harmonics during cutting\u003c\/li\u003e\n  \u003cli\u003ePositive tooth rake angle improves cutting aggressiveness on ferrous metals\u003c\/li\u003e\n  \u003cli\u003e0.0800-inch kerf width provides consistent material removal\u003c\/li\u003e\n  \u003cli\u003eWelded loop construction in the RX Plus series for production bandsaw use\u003c\/li\u003e\n  \u003cli\u003eNot configured for contour cutting — suited for straight, structural, and bar stock cuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for horizontal or vertical bandsaws that accept a 16 foot 6 inch blade loop with a 1-1\/2 inch blade width. Verify your saw's wheel diameter, blade guide spacing, and tension specifications before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBlade installation should be performed by a qualified technician familiar with bandsaw equipment. Power down and lockout the saw before removing the old blade or fitting the new one. Verify blade tension and tracking per the saw manufacturer's guidelines before making a cut. Break in a new bi-metal blade with a reduced feed rate for the first several cuts to allow the tooth edge to seat properly and extend overall blade life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 16 feet 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.05 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 2 to 3 (Variable Pitch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: M42 High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Vari-Set\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.0800 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: RX Plus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.6 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 19903RPB165030\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51542993469746,"sku":"19903RPB165030","price":226.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/54fd173ebc7a8a73260f10b97f2902ad_ca8f4683-c09b-437a-8b3c-09a06628287d.jpg?v=1785913203","url":"https:\/\/voomisupply.com\/products\/lenox-19903rpb165030-bi-metal-bandsaw-blade-2-3-tpi","provider":"Voomi Supply","version":"1.0","type":"link"}