{"product_id":"lenox-1772374-welded-bandsaw-blade-17-ft-4-6-tpi-bi-metal","title":"Lenox 1772374 Welded Bandsaw Blade 17 Ft 4-6 Tpi Bi-metal","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 1772374 is a welded bi-metal bandsaw blade engineered for professional metalcutting applications on stationary band saws. Measuring 17 feet in length and 1-1\/4 inches wide, it runs at a 4 to 6 TPI variable pitch with a Vari-Raker tooth set and a positive rake angle. The blade body is Spring Steel backed with M42+ High Speed Steel teeth, a combination that delivers heat resistance and edge retention when cutting dense or abrasive materials. At 0.042 inches thick with a 0.068-inch kerf width, it balances cut precision with blade stability. Licensed metalworking technicians, fabricators, and tool-room machinists are the primary installers of this blade.\u003c\/p\u003e\n\u003cp\u003eThis blade is suited for production and maintenance cutting environments where a wide range of metals pass through the saw. Rated material applications include Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Tool Steel, Mold Steel, Bearing Steel, and Titanium. The variable pitch pattern reduces harmonic vibration and minimizes tooth loading on interrupted cuts or variable cross-sections, making it a strong choice for structural shapes, tubing, and solid bar stock. It is part of the LENOX QXP series, which targets demanding cutting cycles in commercial fabrication and job-shop environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42+ High Speed Steel teeth for extended edge life on hard and exotic alloys\u003c\/li\u003e\n  \u003cli\u003eVariable 4 to 6 TPI pitch with Vari-Raker tooth set reduces vibration and chatter\u003c\/li\u003e\n  \u003cli\u003ePositive rake angle improves chip clearance and cut rate on dense metals\u003c\/li\u003e\n  \u003cli\u003eSpring Steel back provides flexibility and fatigue resistance under continuous cycling\u003c\/li\u003e\n  \u003cli\u003e0.068-inch kerf width balances material removal with cut accuracy\u003c\/li\u003e\n  \u003cli\u003eWelded construction for consistent tension and smooth tracking on stationary band saws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a replacement or upgrade blade for stationary band saws accepting a 17-foot, 1-1\/4-inch wide welded blade. Verify your saw's wheel diameter, blade guide clearance, and tension rating before installing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBlade installation should be performed by qualified metalworking technicians familiar with band saw tensioning and tracking procedures. Power down and lock out the saw before removing the old blade or mounting the new one. Wear cut-resistant gloves when handling the coiled blade — the teeth are exposed and the spring-steel back can snap open with force. After mounting, run the saw at low speed with no load to confirm proper tracking and blade-guide alignment before cutting.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 17 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.042 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.068 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 4 to 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Vari-Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42+\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: QXP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Tool Steel, Mold Steel, Bearing Steel, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.23 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1772374\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51544487690546,"sku":"1772374","price":161.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f491b787c2be91677b0eb46cf7b61a06_7c5a8848-a006-4ca5-83c7-11ee5f51c98d.jpg?v=1785927815","url":"https:\/\/voomisupply.com\/products\/lenox-1772374-welded-bandsaw-blade-17-ft-4-6-tpi-bi-metal","provider":"Voomi Supply","version":"1.0","type":"link"}