{"product_id":"lenox-1772372-welded-bandsaw-blade-4-to-6-tpi-bi-metal","title":"Lenox 1772372 Welded Bandsaw Blade 4 to 6 Tpi Bi-metal","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 1772372 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in industrial and shop environments. Measuring 16 feet 10 inches in length and 1-1\/4 inches wide with a 0.042-inch thickness, this blade runs on horizontal and vertical metal-cutting bandsaws found in fabrication shops, machine shops, and industrial facilities. The variable 4 to 6 TPI pitch pattern reduces vibration and harmonic noise during the cut, while the M42+ high speed steel tooth material maintains edge hardness when cutting difficult alloys. Licensed tradespeople and shop machinists are the primary installers and operators.\u003c\/p\u003e\n\u003cp\u003eThis blade is suited for cutting a broad range of metals including alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, titanium, aluminum, and other non-ferrous metals. The QXP series variable-pitch design with a Vari-Raker tooth set handles both thin-wall and solid cross-sections. It is a strong fit for production cutting environments where a single blade must transition between multiple material types without a blade change. Contour cutting is not a rated application for this blade.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction with M42+ high speed steel teeth bonded to a spring steel back for durability and flex resistance\u003c\/li\u003e\n  \u003cli\u003eVariable 4 to 6 TPI pitch with Vari-Raker tooth set reduces vibration and improves surface finish\u003c\/li\u003e\n  \u003cli\u003ePositive rake angle increases cutting aggression on tough materials including titanium and stainless steel\u003c\/li\u003e\n  \u003cli\u003e0.068-inch kerf width provides a clean, controlled cut with minimal material loss\u003c\/li\u003e\n  \u003cli\u003eQXP series designation indicates a high-performance production-grade blade spec\u003c\/li\u003e\n  \u003cli\u003eWelded construction for consistent blade tracking and long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-compatible replacement or upgrade blade for metal-cutting bandsaws that accept a 16-foot 10-inch by 1-1\/4-inch blade. Verify wheel diameter and blade guide spacing on the host machine before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBlade installation and tensioning should be performed by a qualified machinist or shop technician following the bandsaw manufacturer's tension specifications for a 1-1\/4-inch blade. Power down and lock out the machine before removing the old blade or installing the new one. Wear cut-resistant gloves when handling the blade, as the edges and teeth present a laceration hazard. Confirm blade tracking and guide alignment before resuming operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 16 feet 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.042 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 4 to 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Vari-Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel (M42+)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.068 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Tool Steel, Mold Steel, Bearing Steel, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: QXP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1772372\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51539975995698,"sku":"1772372","price":163.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f491b787c2be91677b0eb46cf7b61a06_e83c81f4-dc79-4d5a-afde-c92d0dbdd808.jpg?v=1785845274","url":"https:\/\/voomisupply.com\/products\/lenox-1772372-welded-bandsaw-blade-4-to-6-tpi-bi-metal","provider":"Voomi Supply","version":"1.0","type":"link"}