{"product_id":"lenox-1772336-welded-bandsaw-blade-3-4-tpi-bi-metal","title":"Lenox 1772336 Welded Bandsaw Blade 3-4 Tpi Bi-metal","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe LENOX 1772336 is a welded bi-metal bandsaw blade engineered for demanding metal cutting applications on vertical and horizontal bandsaws. It measures 154 inches long and 1-1\/4 inches wide, with a 0.042-inch body thickness and a variable pitch of 3 to 4 TPI. The tooth material is M42+ high speed steel — a cobalt-enhanced grade that resists heat and maintains edge life when cutting hard alloys. The QXP series ground tooth geometry and positive rake angle promote efficient chip removal and smooth feed rates. Licensed HVAC, plumbing, and mechanical contractors, as well as fabrication shops, rely on blades like this for clean, accurate cuts through structural and specialty metals.\u003c\/p\u003e\u003cp\u003eThis blade is suited for production and maintenance cutting environments where material variety is high. The variable pitch design reduces vibration and harmonic resonance during the cut, which matters when transitioning between thin-walled and solid stock. Compatible material applications include alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, aluminum, other non-ferrous metals, and titanium. The single-level tooth set and 0.0700-inch kerf width provide predictable, repeatable cuts with minimal material waste. It is a practical choice for fabrication shops, mechanical contractors, and maintenance facilities running metal-cutting bandsaws.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42+ high speed steel teeth for extended edge life on hard and abrasive alloys\u003c\/li\u003e\n\u003cli\u003eVariable pitch (3 to 4 TPI) reduces vibration and noise during the cut\u003c\/li\u003e\n\u003cli\u003eGround, positive-rake tooth form improves cut quality and chip evacuation\u003c\/li\u003e\n\u003cli\u003eSpring steel back for flex resistance and fatigue life under continuous cycling\u003c\/li\u003e\n\u003cli\u003eSingle-level tooth set with 0.0700-inch kerf for consistent, repeatable cuts\u003c\/li\u003e\n\u003cli\u003eBroad material compatibility including stainless steel, titanium, and mold steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit welded replacement blade for bandsaws accepting a 154-inch by 1-1\/4-inch blade in bi-metal variable-pitch configurations. Verify your saw's blade length, width, and thickness specifications before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBandsaw blade installation should be performed by qualified personnel familiar with blade tensioning and tracking procedures. Power down and lock out the saw before removing the old blade or fitting the new one. Wear cut-resistant gloves when handling the coiled blade — the teeth and welded joint present laceration hazards. Follow the saw manufacturer's tension and tracking specifications; improper tension can cause blade drift, premature weld fatigue, or blade breakage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 154 inches (12 feet 10 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.042 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 3 to 4 variable pitch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKerf Width\u003c\/strong\u003e: 0.0700 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: M42+ High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Variable (Ground)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Single Level Set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: QXP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Non-Ferrous Metal, Carbon Steel, Stainless Steel, Tool Steel, Mold Steel, Bearing Steel, Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1772336\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51541592506674,"sku":"1772336","price":142.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f491b787c2be91677b0eb46cf7b61a06_0160cc46-05d4-4814-bc0b-1d2e54504d4f.jpg?v=1785880141","url":"https:\/\/voomisupply.com\/products\/lenox-1772336-welded-bandsaw-blade-3-4-tpi-bi-metal","provider":"Voomi Supply","version":"1.0","type":"link"}