{"product_id":"lenox-1351d2c3895-band-saw-blade-coil-3-8-in-100-ft-6-tpi","title":"Lenox 1351D2C3895 Band Saw Blade Coil 3\/8 in 100 Ft 6 Tpi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 1351D2C3895 is a bi-metal band saw blade in coil stock form, designed for shops and trade professionals who cut blades to custom lengths on-site or at a service counter. The blade measures 3\/8 inch wide and 0.035 inch thick, running a constant 6 teeth per inch (TPI) hook tooth form with a Lenox tooth set. The bi-metal construction pairs a flexible alloy steel back with high speed steel (HSS) teeth, combining fatigue resistance with cutting-edge hardness. This coil delivers 100 feet of usable stock per roll, weighing approximately 5 pounds.\u003c\/p\u003e\n\u003cp\u003eThis coil stock suits contour cutting applications across metal fabrication, plumbing, HVAC, and general trade work where a bandsaw is used to cut pipe, tubing, structural shapes, or mixed-material assemblies. The 6 TPI constant pitch is well matched to medium-thickness metal stock and thin-wall tubing. Installers and shop technicians who weld or braze their own blade loops will find this coil format efficient for high-volume or variable-length needs. The flexible back allows the blade to track cleanly around bandsaw wheels without premature cracking.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction: flexible alloy steel back bonded to high speed steel teeth for extended blade life\u003c\/li\u003e\n  \u003cli\u003e6 TPI constant pitch hook tooth form suited to medium-section metal cutting and contour work\u003c\/li\u003e\n  \u003cli\u003e3\/8 inch blade width supports tight-radius contour cuts on typical trade bandsaws\u003c\/li\u003e\n  \u003cli\u003e0.035 inch blade thickness reduces kerf and minimizes material waste\u003c\/li\u003e\n  \u003cli\u003e100-foot coil allows custom blade lengths to be cut and welded as needed\u003c\/li\u003e\n  \u003cli\u003eLenox tooth set geometry for consistent chip clearance and straight tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on bandsaws that accept 3\/8 inch wide blade stock. Coil format requires a blade welder or brazing setup to complete the loop; verify wheel diameter and blade guide clearance on the target machine before cutting to length.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBlade coil stock is typically handled by machinists, fabricators, or tool-room technicians using a dedicated band saw blade welder. Disconnect and lock out power to the bandsaw before removing an old blade or installing a new loop. Use appropriate cut-resistant gloves when uncoiling and handling blade stock, as the toothed edge presents a laceration hazard. Verify that the finished blade length and tension setting match the manufacturer specifications for the specific bandsaw model being serviced.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoil Length\u003c\/strong\u003e: 100 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Hook\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Lenox\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1351D2C3895\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51542818324786,"sku":"1351D2C3895","price":571.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f4febaf92672ccc9f642d235c987020e_bc5b970f-c2c0-4858-8715-64a8e287267e.jpg?v=1785908278","url":"https:\/\/voomisupply.com\/products\/lenox-1351d2c3895-band-saw-blade-coil-3-8-in-100-ft-6-tpi","provider":"Voomi Supply","version":"1.0","type":"link"}