{"product_id":"lenox-1348d2c1464-band-saw-blade-coil-6-tpi-1-4-in-100-ft","title":"Lenox 1348D2C1464 Band Saw Blade Coil 6 Tpi 1\/4 in 100 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 1348D2C1464 is a bi-metal band saw blade coil stock designed for continuous-length cutting applications in metal fabrication, plumbing, HVAC, and general trade work. The coil measures 100 feet in length and 1\/4 inch wide with a 0.035 inch blade thickness, giving technicians and fabricators the flexibility to cut blades to the exact length needed for any band saw frame. The blade runs a constant 6 teeth per inch (TPI) hook-tooth pattern, making it well suited for moderate-thickness metal stock. High speed steel teeth are electron-beam welded to a flexible alloy steel back, combining edge hardness with resistance to blade fatigue and breakage during contour cuts.\u003c\/p\u003e\n\u003cp\u003eThis coil stock is intended for use in metal-cutting band saws in both residential service and commercial fabrication environments. Typical applications include cutting copper pipe, conduit, steel tubing, angle iron, and structural shapes. The flexible back construction makes it especially practical for contour cutting on curved or irregular workpieces. HVAC technicians, plumbers, electricians, and general fabricators who run band saws regularly will benefit from keeping a full 100-foot coil on hand to weld or pin custom blade lengths as needed rather than stocking multiple pre-cut blades.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction: high speed steel teeth bonded to a flexible alloy steel back for durability and fatigue resistance\u003c\/li\u003e\n  \u003cli\u003e6 TPI constant-pitch hook-tooth pattern optimized for moderate-thickness metal cutting\u003c\/li\u003e\n  \u003cli\u003e1\/4 inch blade width and 0.035 inch thickness for compatibility with narrow-throat band saw guides\u003c\/li\u003e\n  \u003cli\u003e100-foot coil allows custom blade lengths to be cut and welded on-site\u003c\/li\u003e\n  \u003cli\u003eFlexible back design supports contour cutting on curved or irregular workpieces\u003c\/li\u003e\n  \u003cli\u003eLenox tooth set geometry for consistent kerf width and reduced blade drift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a continuous coil replacement for use in metal-cutting band saws that accept 1\/4 inch wide bi-metal blade stock. Confirm your band saw's guide and wheel specifications before cutting and welding blades from this coil.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eCutting and welding band saw blades from coil stock is typically performed by experienced fabricators or tool-shop technicians using a blade welder and blade grinder. Always power down and disconnect the band saw from its power source before installing or changing blades. Wear cut-resistant gloves when handling coil stock, as the blade edges remain sharp throughout handling. Follow the band saw manufacturer's tensioning and tracking procedures when mounting a newly welded blade.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Hook\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Lenox\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoil Length\u003c\/strong\u003e: 100 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1348D2C1464\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51543669375282,"sku":"1348D2C1464","price":571.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/56bcdad6b8ebc0e68877ce302c2b1d87.jpg?v=1785921323","url":"https:\/\/voomisupply.com\/products\/lenox-1348d2c1464-band-saw-blade-coil-6-tpi-1-4-in-100-ft","provider":"Voomi Supply","version":"1.0","type":"link"}