{"product_id":"lenox-1012d2c12127-band-saw-blade-coil-14-tpi-bi-metal","title":"Lenox 1012D2C12127 Band Saw Blade Coil 14 Tpi Bi-metal","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe LENOX 1012D2C12127 is a bi-metal band saw blade coil stock designed for continuous-use cutting applications in metal fabrication, mechanical contracting, and industrial service environments. The coil supplies 100 feet of usable blade material at 1\/2 inch width and 0.025 inch thickness, allowing shop personnel to cut custom blade lengths to fit a wide range of band saw frames. The blade body uses a flexible back construction to resist fatigue and cracking during extended use. High speed steel teeth are set in a raker pattern at a constant 14 teeth per inch pitch, making this coil well suited for consistent stock removal on solid and structural metal sections.\u003c\/p\u003e\n\u003cp\u003eThis coil stock is appropriate for residential and commercial trade shops where band saws are used to cut pipe, conduit, angle iron, bar stock, and similar ferrous and non-ferrous materials. The constant 14 TPI pitch delivers smooth, controlled cuts on medium-thickness sections. Contour cutting capability makes it usable on curved or irregular workpiece profiles as well as straight crosscuts. HVAC, plumbing, and mechanical contractors who maintain their own band saws on the shop floor will find a 100-foot coil an efficient way to keep multiple machines stocked without repeated small orders.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction with high speed steel teeth bonded to a flexible alloy back for durability and fatigue resistance\u003c\/li\u003e\n  \u003cli\u003e14 teeth per inch constant pitch for consistent chip load on medium-section metal stock\u003c\/li\u003e\n  \u003cli\u003eRaker tooth set pattern for efficient chip clearance and reduced heat buildup\u003c\/li\u003e\n  \u003cli\u003eFlexible back design reduces blade cracking during tight-radius and contour cuts\u003c\/li\u003e\n  \u003cli\u003e100-foot coil length allows custom sizing to fit multiple band saw models from a single spool\u003c\/li\u003e\n  \u003cli\u003eStraight tooth form delivers predictable feed rates on solid bar, pipe, and structural shapes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a coil-stock replacement blade for horizontal and vertical band saws accepting 1\/2 inch wide bi-metal blades with a 0.025 inch blade thickness. Cut to length and weld or braze to the required loop dimension for the target saw.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBlade cutting and welding should be performed by a qualified technician using a blade welder appropriate for bi-metal stock. Disconnect and lock out the band saw from its power source before removing the old blade or installing a new loop. Verify blade tension and blade guide alignment after installation per the saw manufacturer specifications. Improper tension or misaligned guides will reduce blade life and cutting accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.5 inches (12.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoil Length\u003c\/strong\u003e: 100 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 20 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242112\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LENOX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1012D2C12127\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LENOX","offers":[{"title":"Default Title","offer_id":51539971440946,"sku":"1012D2C12127","price":568.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f4febaf92672ccc9f642d235c987020e_58b4c306-0f57-4c88-9577-ec2c96d1989f.jpg?v=1785845258","url":"https:\/\/voomisupply.com\/products\/lenox-1012d2c12127-band-saw-blade-coil-14-tpi-bi-metal","provider":"Voomi Supply","version":"1.0","type":"link"}