{"product_id":"lavelle-industries-inc-818mp-platinum-fill-valve-kit","title":"Lavelle Industries Inc 818MP Platinum Fill Valve Kit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe LAVELLE INDUSTRIES INC 818MP is a complete toilet fill valve and flapper repair kit designed to address the two most commonly replaced components in a residential toilet. The kit centers on the Korky Quietfill Platinum fill valve, which adjusts from 7-3\/4 inches to 13-1\/2 inches in height to fit a wide range of toilet tank configurations. It includes a 2 inch flapper rated for toilets using 1.6 GPF or less, making it well suited for all low-flow toilets manufactured since 1994. A refill adjuster is incorporated to deliver the correct volume of water to the bowl and minimize unnecessary water consumption. Licensed plumbers and experienced DIYers install this kit without special tools.\u003c\/p\u003e\u003cp\u003eThe 818MP kit is intended for residential toilet repair applications where the fill valve or flapper is causing slow refill, continuous running, or excessive noise. The height-adjustable valve body accommodates the broad range of tank depths found in standard 1.6 GPF and low-consumption toilet models. The included 528MP fill valve and 100BP 2 inch flapper work together as a matched assembly, reducing the likelihood of mismatched component sizing during service calls.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFill valve adjusts from 7-3\/4 inches to 13-1\/2 inches to fit most toilet tank heights\u003c\/li\u003e\n\u003cli\u003eIncludes 528MP Quietfill Platinum fill valve, 100BP 2 inch flapper, refill tube clip, mounting nut, cone washer, coupling nut, and tamper proof key with instructions\u003c\/li\u003e\n\u003cli\u003eCompatible with 1.6 GPF and lower toilets manufactured since 1994\u003c\/li\u003e\n\u003cli\u003eRefill adjuster controls bowl refill volume to reduce water waste\u003c\/li\u003e\n\u003cli\u003eNo tools required for installation or adjustment\u003c\/li\u003e\n\u003cli\u003eAddresses running, slow-refilling, and noisy toilet symptoms in a single kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement fill valve and flapper kit stated to fit 99 percent of toilets, particularly low-flow models rated at 1.6 GPF or less produced since 1994.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a licensed plumber or a competent DIYer following local plumbing code requirements. Shut off the water supply at the angle stop below the tank and flush to drain residual water before removing the existing fill valve. The adjustable valve body should be set to the correct height for the specific tank depth before tightening the mounting nut. Do not overtighten the mounting nut or coupling nut, as the components are designed for hand-tight plus minimal wrench adjustment to avoid cracking the tank.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Valve Height Adjustment\u003c\/strong\u003e: 7-3\/4 inches to 13-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlapper Size\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Flow\u003c\/strong\u003e: 1.6 GPF or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 9.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 12 per case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: EA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents\u003c\/strong\u003e: 1 528MP fill valve, 1 100BP 2 inch flapper, 1 refill tube clip, 1 mounting nut, 1 cone washer, 1 coupling nut, 1 tamper proof key, instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: LAVELLE INDUSTRIES INC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 818MP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LAVELLE INDUSTRIES","offers":[{"title":"Default Title","offer_id":51524462412082,"sku":"818MP","price":194.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/78b70e7da69f74041720a99927c183f9.jpg?v=1785449624","url":"https:\/\/voomisupply.com\/products\/lavelle-industries-inc-818mp-platinum-fill-valve-kit","provider":"Voomi Supply","version":"1.0","type":"link"}