{"product_id":"knipex-26-18-200-us-diagonal-cutting-plier-8-in-insulated","title":"Knipex 26 18 200 Us Diagonal Cutting Plier 8 in Insulated","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KNIPEX 26 18 200 US is an insulated diagonal cutting plier built for electricians and other trade professionals who need precise, controlled cuts in tight spaces. The long nose head with bevel cutting style allows access to confined areas where standard diagonal cutters cannot reach. At 8 inches overall length, it delivers ultra high leverage for clean cuts through wire and cable. The jaw is half round in profile with a 2-15\/16 inch jaw length, and the maximum cutting capacity is 0.125 inches. The steel body is paired with red and yellow insulated handles rated to meet ASTM F1505 standards, making this tool appropriate for electrical work near energized circuits.\u003c\/p\u003e\n\u003cp\u003eThis plier is suited for residential and commercial electrical applications where insulated tooling is required or preferred. Typical uses include cutting wire leads, trimming component pins, and working inside control panels, junction boxes, or terminal enclosures. The long nose geometry is especially useful in low-voltage control wiring and panel work where clearances are tight and cut placement must be accurate.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eInsulated handles meet ASTM F1505 standards for electrical work near energized conductors\u003c\/li\u003e\n  \u003cli\u003eLong nose head style with bevel cutting edge for precision cuts in confined areas\u003c\/li\u003e\n  \u003cli\u003eUltra high leverage cutting geometry reduces hand fatigue on repetitive cuts\u003c\/li\u003e\n  \u003cli\u003eHalf round jaw profile with 2-15\/16 inch jaw length for extended reach\u003c\/li\u003e\n  \u003cli\u003eMaximum jaw opening capacity of 0.125 inches suitable for small-gauge wire and leads\u003c\/li\u003e\n  \u003cli\u003eSteel body construction for durability in daily trade use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an insulated diagonal cutting plier for general electrical and low-voltage wiring applications requiring ASTM F1505 compliant hand tools.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tool is intended for use by licensed electricians and qualified trade professionals. Before working on any circuit, de-energize and verify the circuit is dead using a calibrated voltage tester even when using insulated tools. Insulated handles reduce risk but do not eliminate it when working near live conductors. Inspect the handle insulation for cracks or damage before each use and remove the tool from service if the insulation is compromised.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJaw Length\u003c\/strong\u003e: 2-15\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Capacity\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Thickness\u003c\/strong\u003e: 0.0938 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Long Nose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Style\u003c\/strong\u003e: Bevel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJaw Type\u003c\/strong\u003e: Half Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle Type\u003c\/strong\u003e: Insulated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle Color\u003c\/strong\u003e: Red and Yellow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASTM F1505\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.46 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KNIPEX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 26 18 200 US\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KNIPEX","offers":[{"title":"Default Title","offer_id":51540667826482,"sku":"26 18 200 US","price":68.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c28f958dcfe1d738ba3d11a602d95715.jpg?v=1785861372","url":"https:\/\/voomisupply.com\/products\/knipex-26-18-200-us-diagonal-cutting-plier-8-in-insulated","provider":"Voomi Supply","version":"1.0","type":"link"}