{"product_id":"keo-907-000-182-combo-drill-countersink-size-8-hss","title":"Keo 907-000-182 Combo Drill Countersink Size 8 Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KEO 907-000-182 is a combination drill and countersink designed for simultaneous drilling and countersinking in a single operation. Built from high-speed steel with a bright, uncoated finish, this tool features a 5\/16 inch drill point diameter, a 118-degree drill point angle, and an 82-degree included angle for the countersink. The 6 inch overall length and 3\/4 inch body diameter make it a long-length tool suited to applications requiring extended reach. Right-hand cutting direction and a plain cutting edge style provide clean, reliable results on a wide range of workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThis combo drill countersink is intended for countersinking applications in metal fabrication, maintenance, and general machining environments. The size 8 trade designation matches standard fastener sizing for common countersunk-head screws. Its double end type extends tool life by providing two usable ends. The long-length design accommodates setups where standard-length tools cannot reach the workpiece. This tool is commonly used by machinists, maintenance technicians, and metalworking tradespeople working with drill presses, CNC equipment, or hand-held power drills.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel construction for durability across a range of metal workpieces\u003c\/li\u003e\n  \u003cli\u003e118-degree drill point angle for efficient material penetration\u003c\/li\u003e\n  \u003cli\u003e82-degree included countersink angle for standard countersunk fastener seating\u003c\/li\u003e\n  \u003cli\u003eDouble end design extends usable tool life\u003c\/li\u003e\n  \u003cli\u003eLong-length body at 6 inches overall for extended-reach applications\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish suitable for general-purpose machining use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use combination drill countersink for size 8 fastener applications requiring a 3\/4 inch body diameter and 82-degree countersink angle.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of this tool should be performed by qualified machinists or tradespeople familiar with proper drill and countersink procedures. Secure the workpiece firmly before operation and ensure the spindle speed is appropriate for the material being cut. Inspect the cutting edges before each use and discontinue use if chipping or excessive wear is observed. Follow all applicable workshop safety practices and equipment manufacturer guidelines.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrade Size\u003c\/strong\u003e: 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Diameter\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Length\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 82 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Plain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright \/ Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLong Length Tool\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KEO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 907-000-182\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KEO","offers":[{"title":"Default Title","offer_id":52048749986098,"sku":"907-000-182","price":156.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0571abd925261a6e7f489fe43df83ee6.jpg?v=1790032900","url":"https:\/\/voomisupply.com\/products\/keo-907-000-182-combo-drill-countersink-size-8-hss","provider":"Voomi Supply","version":"1.0","type":"link"}