{"product_id":"keo-907-000-048-combo-drill-countersink-1-8-in-cobalt","title":"Keo 907-000-048 Combo Drill Countersink 1\/8 in Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KEO 907-000-048 is a combination drill and countersink tool machined from cobalt high-speed steel. It performs two operations in a single pass: drilling a pilot hole and cutting a countersink seat in one setup. The tool carries a 1\/8 inch body diameter, a 3\/64 inch drill point, and a 4 inch overall length. The 118-degree drill point angle and 60-degree included countersink angle are standard geometry for general metalworking and sheet metal applications. The bright, uncoated finish is appropriate for use with cutting fluid on ferrous and non-ferrous materials. Cobalt construction improves heat and wear resistance compared to standard high-speed steel, making this tool suitable for tougher alloys and production environments.\u003c\/p\u003e\n\u003cp\u003eThis combo drill countersink is sized for trade size 1 applications and is well suited to fabrication shops, maintenance and repair operations, and any setting where countersunk fastener holes are drilled in metal. The right-hand cut and plain cutting edge make it compatible with standard drill press and CNC spindle setups. The long-length design at 4 inches overall provides reach for deeper setups or fixtures with limited vertical access. It is not an aircraft-style tool and is not tapered.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt construction for improved heat resistance and extended tool life in hard or abrasive materials\u003c\/li\u003e\n  \u003cli\u003eCombo drill-countersink geometry completes pilot drilling and countersink seating in one pass\u003c\/li\u003e\n  \u003cli\u003e118-degree drill point angle and 60-degree included countersink angle for standard fastener prep\u003c\/li\u003e\n  \u003cli\u003eLong-length design at 4 inches OAL provides additional reach in restricted setups\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, plain cutting edge  -  compatible with standard drill press and CNC spindles\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish, designed for use with cutting fluid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard tooling selection for trade size 1 combination drill and countersink applications in general metalworking, fabrication, and maintenance operations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of this tool should be performed by qualified machinists or trained trade professionals. Secure the tool in an appropriate collet or drill chuck rated for the 1\/8 inch body diameter before operation. Always power down and de-energize the machine spindle before tool changes. Follow applicable shop safety standards and use appropriate cutting fluid for the workpiece material to maximize tool life and cut quality.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrade Size\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Diameter\u003c\/strong\u003e: 0.047 inches (3\/64)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Length\u003c\/strong\u003e: 3\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Plain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLong Length Tool\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.012 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241603\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KEO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 907-000-048\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KEO","offers":[{"title":"Default Title","offer_id":52108169871666,"sku":"907-000-048","price":65.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/eaec6a874964fec8f794dd7f2b9df7fd.jpg?v=1790074711","url":"https:\/\/voomisupply.com\/products\/keo-907-000-048-combo-drill-countersink-1-8-in-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}