{"product_id":"kennametal-7096910-carbide-grooving-insert-0-099-in","title":"Kennametal 7096910 Carbide Grooving Insert 0.099 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 7096910 is a carbide grooving insert designed for precision groove-turning operations on CNC lathes and turning centers. Part of the Beyond Evolution series, this neutral-hand insert features an AlTiN coating and a GUP chip breaker geometry with a positive rake angle. It delivers a cutting width of 0.099 inches (2.52 mm) and a corner radius of 0.008 inches (0.20 mm), making it suited to tight-tolerance external and face grooving applications. The KCU10B manufacturer grade provides the wear resistance and edge toughness required for interrupted cuts and difficult-to-machine materials. Installed via a clamp-style holding method, this insert seats securely in compatible EG-U-GUP-Metric toolholders with a 0-degree lead angle.\u003c\/p\u003e\u003cp\u003eThis insert is intended for use in production turning environments where consistent groove geometry and chip control are critical. The GUP chip breaker promotes efficient chip evacuation during groove profiling, parting, and undercut operations on a range of workpiece materials. The neutral hand orientation allows application in standard right- or left-hand grooving setups where the insert style supports it. CNC machinists, tool-and-die shops, and precision component manufacturers are the primary users of this insert style. The insert size code 2 and EG-U-GUP-Metric style designation should be matched to the corresponding Kennametal toolholder before installation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCarbide substrate with AlTiN coating for elevated wear resistance and heat tolerance\u003c\/li\u003e\n\u003cli\u003eGUP chip breaker geometry promotes controlled chip formation during grooving\u003c\/li\u003e\n\u003cli\u003ePositive rake angle reduces cutting forces on the workpiece\u003c\/li\u003e\n\u003cli\u003eCutting width of 0.099 inches (2.52 mm) with 0.008-inch (0.20 mm) corner radius for tight-tolerance grooves\u003c\/li\u003e\n\u003cli\u003eClamp-style insert holding method ensures rigid, repeatable seating\u003c\/li\u003e\n\u003cli\u003eMulti-use tool designation supports use across multiple grooving applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with EG-U-GUP-Metric style grooving toolholders accepting insert size code 2. Verify toolholder insert pocket specification against the Beyond Evolution series compatibility chart before use.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and insert changes should be performed by a qualified CNC machinist or tooling technician with the machine in a full stop, locked-out state per applicable safety procedures. Use the correct torque driver and clamping screw specified by the toolholder manufacturer  -  do not overtighten or substitute hardware. Inspect the insert pocket and clamping screw for wear or debris before seating the new insert. Confirm cutting parameters against Kennametal Beyond Evolution series speed and feed recommendations for the workpiece material before resuming operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: EG-U-GUP-Metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Beyond Evolution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCU10B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: GUP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.099 inches (2.52 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.008 inches (0.20 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-use Tool\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7096910\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51739565687090,"sku":"7096910","price":221.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7de8bd9963475bb4304ade0fd3d0f21d_035f51e2-3ad2-4e97-8dd9-e1129aa8d064.jpg?v=1788816378","url":"https:\/\/voomisupply.com\/products\/kennametal-7096910-carbide-grooving-insert-0-099-in","provider":"Voomi Supply","version":"1.0","type":"link"}