{"product_id":"kennametal-7096818-grooving-insert-0-158-inch-carbide","title":"Kennametal 7096818 Grooving Insert 0.158 Inch Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 7096818 is a carbide grooving insert designed for precision grooving operations on CNC lathes and turning centers. Built to the A4G-P-GMP style with an insert size code of 4, it features a 0.158-inch (4.00 mm) cutting width and a positive rake geometry that reduces cutting forces and promotes cleaner chip flow. The AlTiN coating on the KCU10B grade substrate delivers elevated heat resistance and extended tool life in demanding cutting environments. A neutral hand orientation makes this insert suitable for a range of grooving setups without requiring a handed toolholder.\u003c\/p\u003e\n\u003cp\u003eThis insert fits turning applications where consistent groove width and finish are critical, including external grooving on ferrous and non-ferrous workpieces in production and job-shop environments. The GMP chip breaker geometry is suited for general-purpose grooving where reliable chip control is needed across a range of feed rates and depths. Licensed machinists and CNC operators in manufacturing, aerospace component work, and precision machining shops are the primary end users. The clamp-style insert holding method is compatible with standard Series A4 toolholders.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.158-inch (4.00 mm) cutting width for precise groove dimensioning\u003c\/li\u003e\n  \u003cli\u003eKCU10B carbide grade with AlTiN coating for heat and wear resistance\u003c\/li\u003e\n  \u003cli\u003ePositive rake geometry reduces cutting forces and improves chip evacuation\u003c\/li\u003e\n  \u003cli\u003eGMP chip breaker for reliable chip control in general-purpose grooving\u003c\/li\u003e\n  \u003cli\u003e0.0320-inch (0.80 mm) corner radius for controlled edge geometry\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation for flexible toolholder compatibility\u003c\/li\u003e\n  \u003cli\u003eMulti-use tool designation supports varied grooving applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with Series A4 grooving toolholders that accept clamp-style insert seating at insert seat size 4. Verify toolholder specifications against the A4G-P-GMP insert style before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician. Ensure the machine spindle is fully stopped and locked out before changing inserts. Seat the insert firmly in the clamp pocket and verify the clamp screw torque is consistent with the toolholder manufacturer guidelines. Inspect the insert seat for chips or debris before seating a new insert to prevent improper clamping and edge chipping.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: A4G-P-GMP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width (Decimal Inch)\u003c\/strong\u003e: 0.158 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width (mm)\u003c\/strong\u003e: 4.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius (Decimal Inch)\u003c\/strong\u003e: 0.0320 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius (mm)\u003c\/strong\u003e: 0.80 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCU10B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: GMP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: A4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-use Tool\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7096818\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51745961869618,"sku":"7096818","price":569.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/637ec725b0b02026792050f20188b9ed_961a0405-c867-41b1-ba7e-14b6973259bd.jpg?v=1788866064","url":"https:\/\/voomisupply.com\/products\/kennametal-7096818-grooving-insert-0-158-inch-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}