{"product_id":"kennametal-7096407-cdg-grooving-insert-0-030-in-rh-carbide","title":"Kennametal 7096407 Cdg Grooving Insert 0.030 in Rh Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 7096407 is a CDG-style carbide grooving insert engineered for precision external grooving and turning operations on CNC lathes and turning centers. It features a 0.0300-inch (0.762 mm) cutting width and a maximum depth of cut of 0.0750 inches (2.00 mm), making it well-suited for tight-tolerance groove work in ferrous and non-ferrous materials. The insert carries a KCU10B grade designation and is coated with AlTiN for elevated heat resistance and extended tool life at higher cutting speeds. Right-hand orientation and a positive rake geometry contribute to clean chip formation and reduced cutting forces. This insert is installed and replaced by machinists and CNC tooling technicians.\u003c\/p\u003e\u003cp\u003eThis insert is designed for use in right-hand grooving toolholders that accept the CDG insert style with a screw-holding method. Insert size code 120302 places it in compact-profile applications where close-clearance grooving is required. With a lead angle of 15 degrees and a relief angle of 15 degrees, the geometry supports consistent chip control across a range of workpiece materials. The multi-use designation indicates suitability across grooving and related turning passes. Face grooving applications are not supported with this insert configuration.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCDG insert style with screw-holding method for positive, repeatable seating in compatible toolholders\u003c\/li\u003e\n\u003cli\u003eKCU10B carbide grade with AlTiN coating for heat resistance and wear performance at elevated cutting speeds\u003c\/li\u003e\n\u003cli\u003e0.0300-inch (0.762 mm) cutting width with a maximum depth of cut of 0.0750 inches (2.00 mm)\u003c\/li\u003e\n\u003cli\u003ePositive rake geometry at 15-degree lead and relief angles for reduced cutting forces and clean chip evacuation\u003c\/li\u003e\n\u003cli\u003e2 cutting edges per insert, extending usable tool life per unit\u003c\/li\u003e\n\u003cli\u003e80-degree included angle with a 0.0780-inch (1.98 mm) corner radius for controlled groove geometry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement grooving insert for right-hand CDG-style toolholders accepting insert size code 120302 with screw clamping. Verify toolholder seat geometry and insert pocket dimensions before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and indexing of carbide grooving inserts should be performed by a qualified machinist or CNC tooling technician. Power down and lock out the machine spindle before changing or indexing inserts. Use the correct torx or hex key to torque the clamping screw to the toolholder manufacturer's specified value — do not over-tighten, as this can fracture the insert. Inspect the insert pocket and clamping surfaces for chips or debris before seating the new insert.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: CDG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 120302\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.0300 inches (0.762 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.0750 inches (2.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCU10B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 80 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0780 inches (1.98 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.0500 inches (1.27 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 0.0500 inches (1.27 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.1560 inches (3.96 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size\u003c\/strong\u003e: 1.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Grooving\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-use Tool\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7096407\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51727186166066,"sku":"7096407","price":251.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e69f30276478837375b436a5466918de.jpg?v=1788674476","url":"https:\/\/voomisupply.com\/products\/kennametal-7096407-cdg-grooving-insert-0-030-in-rh-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}