{"product_id":"kennametal-7093182-vbgt-turning-insert-diamond-carbide","title":"Kennametal 7093182 Vbgt Turning Insert Diamond Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 7093182 is a VBGT-style carbide turning insert designed for precision external turning and finishing operations on CNC and manual lathes. The insert features a 35-degree diamond shape (V code) with a 5-degree relief angle and a 0.0040-inch (0.10 mm) corner radius, making it well-suited for fine finishing passes where tight tolerances and surface finish quality are critical. Coated with AlTiN for heat resistance and extended tool life, it carries the KCU10B manufacturer grade. The LF chip breaker geometry supports light finishing cuts. This insert is a neutral-hand design with 2 cutting edges and is installed by licensed machinists and CNC operators in production and job shop environments.\u003c\/p\u003e\n\u003cp\u003eThis insert is used in external turning applications on ferrous and non-ferrous workpieces where a sharp, precise cutting edge and minimal nose radius are required. The VBGT style with the G tolerance and B clearance code suits applications demanding close dimensional repeatability. Typical use cases include finish turning of shafts, bores, and contoured profiles on lathes equipped with compatible VBGT toolholders. The 3\/8-inch inscribed circle and 3\/16-inch insert thickness fit standard VBGT seat toolholders in that size class.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e35-degree diamond insert shape (V code) for access to tight contours and shoulders\u003c\/li\u003e\n  \u003cli\u003e0.0040-inch (0.10 mm) corner radius for fine finishing and tight-tolerance work\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides heat resistance and wear protection at elevated cutting speeds\u003c\/li\u003e\n  \u003cli\u003eKCU10B grade carbide substrate suited for finishing grades of cutting\u003c\/li\u003e\n  \u003cli\u003eLF chip breaker geometry optimized for light finishing cuts\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation for use in left- or right-hand compatible toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement for VBGT-style toolholders accepting a 3\/8-inch inscribed circle, 3\/16-inch thick diamond insert with B clearance and G tolerance codes. Verify toolholder seat specifications before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator with the machine powered down and all axes locked or in a safe state. Use a calibrated torque wrench and the correct clamp screw driver to seat the insert fully and evenly in the toolholder pocket. Inspect the insert seat for chips or debris before seating to prevent insert rocking. Never overtighten the clamp screw, as carbide inserts are brittle and can fracture under uneven clamping load.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: VBGT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Diamond (V)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 5 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0040 inches (0.10 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.3750 inches (9.53 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1875 inches (4.76 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.1875 inches (4.76 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCU10B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: LF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7093182\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51742254694706,"sku":"7093182","price":229.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/91ed7cd5260b4a504b37521fea071bb3_ca53fd2f-718d-4b6c-9fea-2c4eab4a0476.jpg?v=1788836238","url":"https:\/\/voomisupply.com\/products\/kennametal-7093182-vbgt-turning-insert-diamond-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}