{"product_id":"kennametal-6771166-replaceable-drill-tip-22-00mm-kcp15a","title":"Kennametal 6771166 Replaceable Drill Tip 22.00mm KCP15A","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 6771166 is a replaceable drill tip designed for use in modular drilling systems that accept ZA-seat inserts. Made from solid carbide with a fine grain microstructure and PVD-applied AlTiN coating, this tip delivers the hardness and thermal resistance required when cutting steel, stainless steel, and cast iron. The 22.00 mm cutting diameter and 180-degree flat point geometry make it well suited for flat-bottom drilling applications where a conventional pointed tip would leave an unfinished floor. Two straight flutes and a four-margin configuration support stable cutting action and dimensional accuracy across a range of hole depths. Licensed machinists and CNC operators working in production or job-shop environments install this tip as part of the KTFSS series tooling platform.\u003c\/p\u003e\n\u003cp\u003eThis tip is applied in drilling operations on steel, stainless steel, and cast iron workpieces, covering ISO material groups P, M, and K. Its flat point geometry supports flat-bottom holes, inclined entry, inclined exit, and counterboring operations. The straight flute and straight spiral design suit short-chipping materials commonly found in general machining, automotive component production, and metalworking applications. No through-coolant is required, making it compatible with standard non-coolant-through toolholders in the KTFSS platform.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e22.00 mm cutting diameter with 0.8661 inch decimal equivalent for mixed-unit programming\u003c\/li\u003e\n  \u003cli\u003e180-degree flat point angle enables flat-bottom holes and inclined-entry or inclined-exit drilling\u003c\/li\u003e\n  \u003cli\u003eSolid carbide fine grain construction for wear resistance in ferrous materials\u003c\/li\u003e\n  \u003cli\u003ePVD AlTiN coating improves thermal stability and tool life in steel and stainless steel cutting\u003c\/li\u003e\n  \u003cli\u003eZA insert seat size for secure clamping and repeatable tip indexing\u003c\/li\u003e\n  \u003cli\u003eTwo-flute, four-margin geometry supports concentricity and hole quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with KTFSS series modular drill bodies that accept ZA-seat replaceable tips. Compatible with primary workpiece materials steel, stainless steel, and cast iron, corresponding to ISO material groups P, M, and K. No through-coolant supply is required from the toolholder.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eReplaceable drill tip installation should be performed by a qualified machinist with the spindle locked out and all machine power isolated. Seat surfaces on both the tip and the drill body should be inspected and cleaned before seating the tip to ensure proper clamping and runout. Follow the drill body manufacturer torque and clamping guidelines for ZA-seat tips. Improper seating or contaminated mating surfaces can result in tip movement, poor hole quality, or premature insert failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 22.00 mm (0.8661 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 180 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Fine Grain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCP15A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KTFSS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: ZA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: FEG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.4331 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length \/ Projection\u003c\/strong\u003e: 0.4949 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 11.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 13.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron (ISO P, M, K)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.08157 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6771166\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51733827551538,"sku":"6771166","price":288.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8c8486841931b0a38a21fa8f3f3f4662_bafede4e-4114-4eb0-8de6-b50aa57a2230.jpg?v=1788759493","url":"https:\/\/voomisupply.com\/products\/kennametal-6771166-replaceable-drill-tip-22-00mm-kcp15a","provider":"Voomi Supply","version":"1.0","type":"link"}