{"product_id":"kennametal-6771137-replaceable-drill-tip-0-625-in-kcp15a","title":"Kennametal 6771137 Replaceable Drill Tip 0.625 in KCP15A","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 6771137 is a replaceable drill tip designed for use with compatible KTFSS-series modular drilling systems. Manufactured from fine-grain solid carbide and coated with AlTiN via a PVD process, this tip delivers wear resistance and thermal stability during demanding drilling operations. The 180-degree flat point geometry allows flat-bottom drilling, inclined entry, inclined exit, and counterboring applications. At 0.6250 inches in cutting diameter with a 0.3125-inch functional length, this tip installs into a T-seat insert holder using a clamp-style holding method. It is intended for installation by machinists and tool and die professionals working in production or job shop environments.\u003c\/p\u003e\n\u003cp\u003eThis drill tip is suited for drilling steel, stainless steel, and cast iron, corresponding to ISO workpiece material codes P, M, and K. The KTFSS series design supports flat-bottom holes, cross-hole drilling with inclined entry or exit, and counterboring operations. The two-flute, four-margin straight flute configuration promotes chip control and hole quality in these material groups. This tip does not include internal coolant-through capability, so external or flood coolant delivery should be accounted for in the machining setup.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFine-grain solid carbide construction in manufacturer grade KCP15A for consistent edge integrity\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating applied via PVD process for elevated temperature and wear resistance\u003c\/li\u003e\n  \u003cli\u003e180-degree flat point angle enables flat-bottom holes, inclined entry, inclined exit, and counterboring\u003c\/li\u003e\n  \u003cli\u003eTwo-flute, four-margin straight flute geometry supports hole accuracy in steel and cast iron\u003c\/li\u003e\n  \u003cli\u003eT-seat clamp-style insert holding for repeatable tip indexing without regrinding\u003c\/li\u003e\n  \u003cli\u003eNo coolant-through channels — compatible with external or flood coolant strategies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with KTFSS-series modular drill bodies requiring a T-seat replaceable tip. ISO number for this tip is KTFSS06250FEG. Verify seat size, insert geometry (FEG), and body series before ordering.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of replaceable drill tips should be performed by a qualified machinist following the toolholder manufacturer's clamping procedure. Ensure the spindle is fully stopped and the machine is in a safe state before tip removal or installation. Inspect the T-seat pocket for chips or debris before seating the insert, as contamination will affect runout and tip life. Follow the drill body manufacturer's specified clamping sequence — do not substitute fasteners or exceed the recommended clamp torque range published in the body documentation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.6250 inches (5\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.3125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length \/ Projection\u003c\/strong\u003e: 0.3578 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 8.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 9.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 180 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide, Fine Grain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCP15A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: FEG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron (ISO P, M, K)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KTFSS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Number\u003c\/strong\u003e: KTFSS06250FEG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02734 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6771137\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51748697637170,"sku":"6771137","price":193.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8c8486841931b0a38a21fa8f3f3f4662_f90a77fd-694c-4a39-a247-03908b87c4e8.jpg?v=1788896922","url":"https:\/\/voomisupply.com\/products\/kennametal-6771137-replaceable-drill-tip-0-625-in-kcp15a","provider":"Voomi Supply","version":"1.0","type":"link"}