{"product_id":"kennametal-6770637-ceramic-turning-insert-dnga431t0420","title":"Kennametal 6770637 Ceramic Turning Insert DNGA431T0420","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 6770637 is a ceramic turning insert manufactured to the DNGA431T0420 industry standard and offered in grade KYHK15B. This insert features an Alumina TiCN ceramic substrate with an AlTiN PVD coating and a T-Land cutting edge style, making it well suited for high-speed interrupted and continuous cutting operations. The diamond-shaped insert carries a 55-degree included angle, a neutral hand orientation, a negative rake angle, and a 0.0156-inch corner radius. Four cutting edges are available per insert. Licensed machinists and CNC turning specialists install this insert in compatible KENLOC-style toolholders for precision material removal.\u003c\/p\u003e\n\u003cp\u003eThis insert is designed for turning, facing, boring, back turning, and back boring operations. Primary workpiece material categories include cast iron, superalloys and titanium, and hard materials, corresponding to ISO material codes K, S, and H. The insert is part of the KENLOC series and conforms to both ANSI and ISO standards. It is appropriate for production-level machining environments where consistent tool life and controlled chip geometry are required on difficult-to-machine alloys and hardened workpiece materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAlTiN PVD-coated Alumina TiCN ceramic substrate for elevated heat resistance during high-speed cuts\u003c\/li\u003e\n  \u003cli\u003eT-Land cutting edge style reduces chipping on hard and interrupted surfaces\u003c\/li\u003e\n  \u003cli\u003eFour usable cutting edges per insert extend total tool life between change-outs\u003c\/li\u003e\n  \u003cli\u003eDiamond insert shape (55-degree included angle) provides good access in tight bore and facing applications\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation allows use in both left-hand and right-hand toolholder setups\u003c\/li\u003e\n  \u003cli\u003eFlat top chip breaker geometry supports chip control across turning, facing, and boring operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in KENLOC-series toolholders accepting DNGA-style inserts with a 0.5-inch inscribed circle. Conforms to ANSI and ISO standards; ISO designation DNGA150404T01020. Suitable for clamp and pin insert holding methods.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis insert is installed by qualified machinists or CNC tooling technicians. The machine spindle must be fully stopped and the toolholder must be secured in a locked turret position before seating or removing the insert. Use the appropriate clamp and pin hardware specified for KENLOC DNGA toolholders to ensure proper seating and prevent insert movement under cutting loads. Inspect the insert pocket and seating surfaces for damage or debris before each insert change.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: DNGA431T0420\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: DNGA150404T01020\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KYHK15B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Ceramic (Alumina TiCN)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Diamond (D)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 55 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: T-Land\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: Flat Top\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWiper Edge\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 1.2208 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0156 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2031 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.4065 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Pin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron; Superalloys and Titanium; Hard Material\u003c\/li\u003e\n  \u003cli\u003estrong\u0026gt;Multi-Use Applications: Turning; Facing; Boring; Back Turning; Back Boring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KENLOC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI; ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.14 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6770637\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51749371281714,"sku":"6770637","price":316.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0db7182c0b89d59c5a7af548ca09042c_bfc60f6d-d244-43d4-a6d6-fe8bf5962b4b.jpg?v=1788905147","url":"https:\/\/voomisupply.com\/products\/kennametal-6770637-ceramic-turning-insert-dnga431t0420","provider":"Voomi Supply","version":"1.0","type":"link"}