{"product_id":"kennametal-6676560-corner-radius-end-mill-1-in-4-flute-altin","title":"Kennametal 6676560 Corner Radius End Mill 1 in 4 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 6676560 is a solid carbide corner radius end mill built for high-demand metal removal in steel, stainless steel, cast iron, superalloys, titanium, and hard materials. It carries a 1-inch cutting diameter with a 0.06-inch corner radius, a 2.25-inch length of cut, and a 5-inch overall length. The tool features a 4-flute, right-hand spiral configuration with a 36-degree helix angle and an AlTiN (aluminum titanium nitride) PVD coating applied over a submicron carbide grade. The Weldon flat shank measures 1 inch in diameter. This end mill is designed for both roughing and finishing passes in a single setup, making it a productive choice for shops running demanding alloy and hardened-material applications.\u003c\/p\u003e\u003cp\u003eThe 6676560 belongs to the KENNAMETAL H1TE series, which targets aggressive metal cutting in production environments. Typical applications include profiling, slotting, and pocketing in steel and stainless fabrication, mold and die work involving hard materials, and aerospace or energy component machining involving superalloys and titanium. The centercutting geometry allows plunge entry, adding flexibility during toolpath programming. Compatible toolholders listed in manufacturer data include EM-CV Form AD and EM IN-HSK Form A style holders. The normal pitch and fixed helix design suit stable, consistent cutting over the full length of cut.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction with submicron grain for edge toughness in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eAlTiN PVD coating provides heat resistance and extended tool life in high-temperature alloy cuts\u003c\/li\u003e\n\u003cli\u003e0.06-inch corner radius reduces stress concentration at the cutting edge and improves surface finish on fillets\u003c\/li\u003e\n\u003cli\u003e4-flute, right-hand spiral with 36-degree helix balances chip evacuation and radial cutting force\u003c\/li\u003e\n\u003cli\u003eCentercutting design permits direct plunge entry without a pre-drilled starting hole\u003c\/li\u003e\n\u003cli\u003eWeldon flat shank ensures positive, slip-resistant grip in set-screw style toolholders\u003c\/li\u003e\n\u003cli\u003eRated for roughing and finishing in steel, stainless steel, cast iron, superalloys, titanium, and hard material\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with EM-CV Form AD and EM IN-HSK Form A toolholders as specified by the manufacturer. The 1-inch Weldon flat shank fits standard 1-inch bore set-screw holders conforming to those form designations.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or toolroom personnel. Ensure the spindle is fully stopped and the machine is locked out before changing tooling. Seat the Weldon flat against the set-screw contact point and torque the holder fastener per the toolholder manufacturer specification. Verify runout at the cutting diameter before initiating a cut, particularly in tight-tolerance or hard-material applications where edge deflection can accelerate wear.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 36 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Normal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide, Submicron Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN, PVD Process\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys, Titanium, Hard Material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: H1TE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.37 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6676560\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51740563865906,"sku":"6676560","price":960.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0c22a6c5a67254e355430d4bf48b183a_c3a16166-6372-4b36-a78c-8377d3d600a3.jpg?v=1788825973","url":"https:\/\/voomisupply.com\/products\/kennametal-6676560-corner-radius-end-mill-1-in-4-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}