{"product_id":"kennametal-6676525-corner-radius-end-mill-3-4in-4-flute","title":"Kennametal 6676525 Corner Radius End Mill 3\/4in 4-flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 6676525 is a solid carbide corner radius end mill engineered for demanding material removal in steel, stainless steel, cast iron, superalloys, titanium, and hard materials. It carries a 3\/4-inch mill diameter with a 0.03-inch corner radius, a 1-1\/2-inch length of cut, and a 4-inch overall length. The 4-flute, right-hand spiral geometry with a 36-degree helix angle delivers efficient chip evacuation during both roughing and finishing passes. An AlTiN PVD coating provides thermal resistance and extended tool life in high-temperature cutting environments. The centercutting design allows plunge entry, and the Weldon flat shank ensures secure tool holding in collet or end mill holders.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for CNC machining centers handling ferrous metals, heat-resistant superalloys, titanium alloys, and hardened workpiece materials. Its short flute length and submicron carbide grade make it appropriate for rigid setups where chatter control and dimensional accuracy are critical. Compatible toolholding setups include EM-CV Form AD and EM IN-HSK Form A adapters as specified by the manufacturer. It is a single-end tool intended for production and job-shop environments where consistent surface finish and corner geometry are required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4-inch mill diameter with matching 3\/4-inch Weldon flat shank for rigid, slip-resistant clamping\u003c\/li\u003e\n  \u003cli\u003e0.03-inch corner radius reduces stress concentration and improves corner integrity on finished parts\u003c\/li\u003e\n  \u003cli\u003eAlTiN PVD coating provides heat and oxidation resistance for dry and semi-dry cutting in hard materials\u003c\/li\u003e\n  \u003cli\u003e4-flute, right-hand spiral geometry with 36-degree helix supports both roughing and finishing in a single tool\u003c\/li\u003e\n  \u003cli\u003eCentercutting construction allows direct plunge milling without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eSubmicron carbide grade delivers toughness and edge retention across P, M, K, S, and H material classifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with EM-CV Form AD and EM IN-HSK Form A toolholding systems as specified by KENNAMETAL. Suitable for machining steel, stainless steel, cast iron, superalloys, titanium, and hard materials per KENNAMETAL Series H1TE application guidelines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC tooling technician. Power down and lock out the spindle before inserting or changing tooling. Seat the Weldon flat shank fully into the holder and engage the set screw against the flat to prevent axial pull-out. Verify runout with a dial indicator before beginning a production cut, and confirm spindle speed and feed rate against the material and coating specifications before engagement.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/4 inches (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/2 inches (0.5000 inches decimal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inches (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0300 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 36 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Submicron Grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Short\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Normal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys, Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: H1TE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.66 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6676525\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51742047240498,"sku":"6676525","price":632.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0c22a6c5a67254e355430d4bf48b183a_149516e3-3532-43ce-99a3-7d336523cf10.jpg?v=1788835131","url":"https:\/\/voomisupply.com\/products\/kennametal-6676525-corner-radius-end-mill-3-4in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}