{"product_id":"kennametal-6676509-corner-radius-end-mill-1-2-in-4-flute-carbide","title":"Kennametal 6676509 Corner Radius End Mill 1\/2 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 6676509 is a solid carbide corner radius end mill designed for high-performance milling in demanding metalworking applications. It features a 1\/2 inch cutting diameter, a 2 inch length of cut, and a 0.03 inch corner radius that reduces stress concentrations at the tool-workpiece interface and extends tool life in aggressive operations. The AlTiN (aluminum titanium nitride) PVD coating provides elevated heat resistance and hardness, making it suitable for both roughing and finishing passes. With four right-hand spiral flutes and a 36-degree helix angle, this end mill promotes efficient chip evacuation and stable cutting action. It is centercutting and single-end, fitting standard CNC machining center toolholders with a Weldon flat shank.\u003c\/p\u003e\u003cp\u003eThis end mill is engineered for use on steel, stainless steel, cast iron, superalloys, titanium, and hard materials, covering ISO material groups P, M, K, S, and H. The H1TE series designation identifies it as a long-flute geometry suited for applications where extended reach or deep pocket milling is required. It is a practical choice for job shops, production machining environments, and tool rooms running ferrous and difficult-to-machine alloys. Installation is performed by licensed machinists and CNC operators working with vertical or horizontal machining centers, milling machines, or multi-axis platforms.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.03 inch corner radius reduces chipping and stress risers in milled workpieces\u003c\/li\u003e\n\u003cli\u003eAlTiN PVD coating improves heat resistance and wear life in ferrous and hard materials\u003c\/li\u003e\n\u003cli\u003eFour right-hand spiral flutes with normal pitch support both roughing and finishing operations\u003c\/li\u003e\n\u003cli\u003e36-degree helix angle promotes smooth chip flow and reduces cutting forces\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge entry without pre-drilling\u003c\/li\u003e\n\u003cli\u003eWeldon flat shank provides positive drive and resists pullout in high-torque applications\u003c\/li\u003e\n\u003cli\u003eSubmicron carbide grade delivers consistent edge integrity across extended run times\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with EM-CV Form AD and EM IN-HSK Form A toolholding systems as specified by the manufacturer. Designed as an OEM-style replacement or direct selection within the KENNAMETAL H1TE series for 1\/2 inch shank milling applications on steel, stainless steel, cast iron, superalloys, titanium, and hard materials.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully stopped and the machine is locked out before changing tooling. Confirm the Weldon flat is properly aligned with the setscrew in the toolholder to prevent axial pullout under cutting loads. Verify runout with a dial indicator after installation and before beginning any cut to protect both the tool and the workpiece.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.03 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 36 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Normal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys, Titanium, Hard Material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: H1TE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.28 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6676509\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51742338908466,"sku":"6676509","price":289.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0c22a6c5a67254e355430d4bf48b183a_e7694164-2fec-4896-a7e6-fbfbba7d2b37.jpg?v=1788836854","url":"https:\/\/voomisupply.com\/products\/kennametal-6676509-corner-radius-end-mill-1-2-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}