{"product_id":"kennametal-6413216-square-end-mill-1-2in-6-flute-carbide","title":"Kennametal 6413216 Square End Mill 1\/2in 6 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 6413216 is a 6-flute solid carbide square end mill designed for high-performance milling in demanding metalworking applications. Built from KCPM15 carbide grade and coated with AlTiN, this tool handles elevated cutting temperatures and abrasive workpiece materials effectively. The 45-degree helix angle promotes smooth chip evacuation and reduces cutting forces across a range of materials. With a 1\/2 inch cutting diameter and 2 inch length of cut, it suits deep-slotting, profiling, and finishing passes where rigidity and heat resistance are priorities. Licensed machinists and CNC operators in job shop and production environments will find this end mill suited to steel, stainless, and high-temp alloys.\u003c\/p\u003e\n\u003cp\u003eThis end mill is built for single-end use on vertical and horizontal machining centers as well as CNC milling machines. It fits standard 1\/2 inch straight-bore tool holders, collet chucks, and hydraulic chucks. The extended reach configuration with a 2 inch reach length makes it well-suited for deep-pocket milling, cavity work, and contour operations where standard-reach tooling cannot access the feature geometry. It is a right-hand cut, right-hand flute tool.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e6-flute design increases feed rates and improves surface finish compared to 4-flute tooling in finishing cuts\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides oxidation resistance and hardness at elevated cutting temperatures\u003c\/li\u003e\n  \u003cli\u003e45-degree helix angle promotes efficient chip evacuation and reduced cutting pressure\u003c\/li\u003e\n  \u003cli\u003eKCPM15 solid carbide grade delivers wear resistance in ferrous and high-temp alloy machining\u003c\/li\u003e\n  \u003cli\u003eExtended reach of 2 inches allows access to deep pockets and cavity features\u003c\/li\u003e\n  \u003cli\u003eCentercutting construction supports plunge entry without pre-drilled starting holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 1\/2 inch straight-bore tool holding systems including collet chucks, end mill holders, and hydraulic chucks on CNC vertical and horizontal machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the spindle is fully stopped and machine is in an estop or locked-out state before changing tooling. Seat the shank to the full recommended engagement depth in the tool holder and torque the retention mechanism per the tool holder manufacturer specifications. Verify runout with a dial indicator before beginning a production cut to avoid premature tool wear or workpiece damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5000 inches (12.7 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches (50.8 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 2 inches (50.8 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches (114.3 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: KCPM15\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 4.53 x 0.79 x 0.79 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.39 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6413216\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51727161721138,"sku":"6413216","price":347.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a2e3ae56d1b81ed442d81c58c5765a91.jpg?v=1788674181","url":"https:\/\/voomisupply.com\/products\/kennametal-6413216-square-end-mill-1-2in-6-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}