{"product_id":"kennametal-6388800-replaceable-drill-tip-15mm-kcp15a","title":"Kennametal 6388800 Replaceable Drill Tip 15mm KCP15A","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 6388800 is a replaceable drill tip designed for use in KENNAMETAL KTFS-series modular drilling systems. It features a 0.5906-inch (15.00 mm) cutting diameter and a 143-degree included drill point angle optimized for the HPG insert geometry. The tip is manufactured from solid carbide and finished with an AlTiN coating applied via PVD process, delivering heat resistance and wear performance in demanding metal-cutting applications. Seat size is T. This tip is installed by machinists and toolroom technicians working with modular drill bodies on CNC lathes, machining centers, and similar equipment.\u003c\/p\u003e\u003cp\u003eThis drill tip suits applications in production machining environments where repeatable hole quality and fast tip changeovers are required. The replaceable-tip format allows the carbide cutting end to be swapped without removing the entire drill body from the spindle, reducing downtime. Typical materials machined include steels and alloy metals where the KCP15A grade and AlTiN coating provide balanced cutting performance. No coolant-through capability is present on this tip.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e15.00 mm (0.5906 inch) cutting diameter for consistent hole sizing\u003c\/li\u003e\n\u003cli\u003e143-degree drill point angle with HPG insert geometry for controlled entry and chip formation\u003c\/li\u003e\n\u003cli\u003eSolid carbide substrate for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003eAlTiN coating via PVD process for elevated heat resistance and extended tool life\u003c\/li\u003e\n\u003cli\u003eInsert seat size T for direct fitment to compatible KTFS-series drill bodies\u003c\/li\u003e\n\u003cli\u003eNo coolant-through channels  -  suited for flood or dry cutting setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with KENNAMETAL KTFS-series modular drill bodies accepting seat size T replaceable tips.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tip changes should be performed by a qualified machinist or toolroom technician with the spindle fully stopped and the machine in a safe, locked-out state. Use the correct torque wrench and KENNAMETAL-specified seat key for seating the tip  -  do not over-tighten by hand or with non-specified tools. Inspect the seat and tip interface for chips or debris before each installation to ensure full seating and runout accuracy. Follow the tool manufacturer's recommended cutting parameters for the KCP15A grade when setting feeds and speeds.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter (Decimal Inch)\u003c\/strong\u003e: 0.5906 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter (mm)\u003c\/strong\u003e: 15.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 143 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: HPG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCP15A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KTFS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.59 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1.57 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1.57 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02844 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6388800\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51742548558130,"sku":"6388800","price":182.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6347f7cd35a09a3bd394746d06feef03_2c099526-69a0-43a2-aefa-cc2515108d92.jpg?v=1788838073","url":"https:\/\/voomisupply.com\/products\/kennametal-6388800-replaceable-drill-tip-15mm-kcp15a","provider":"Voomi Supply","version":"1.0","type":"link"}