{"product_id":"kennametal-6372015-kentip-fs-indexable-drill-body","title":"Kennametal 6372015 Kentip Fs Indexable Drill Body","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 6372015 is a KenTIP FS series indexable drill body with a straight cylindrical shank, designed for use with interchangeable carbide drill tips in high-production machining environments. The body features a 1\/2 inch shank diameter, a 3xD drill depth-to-diameter ratio, and through-coolant capability, making it suitable for demanding hole-making operations in ferrous and non-ferrous materials. The KTFS toolholder style accepts KenTIP FS replaceable drill tips, eliminating the need to replace the entire drill assembly when the cutting edge wears. This tool body is installed and serviced by machinists, tool-crib technicians, and CNC setup personnel.\u003c\/p\u003e\u003cp\u003eThis drill body is intended for use on CNC machining centers, lathes with live tooling, and drill presses where indexable drill systems are preferred over solid-carbide or brazed-tip drills. The 3xD depth ratio is well suited for general-purpose through-holes and blind holes in a standard depth range. With an overall length of approximately 101 millimeters and a flute length of approximately 52.90 millimeters, the body fits into standard tooling setups without extended-reach adapters in most applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eKenTIP FS series KTFS toolholder style accepts interchangeable replaceable drill tips\u003c\/li\u003e\n\u003cli\u003eThrough-coolant capability for chip evacuation and tool life in deep-hole drilling\u003c\/li\u003e\n\u003cli\u003e1\/2 inch straight cylindrical shank for compatibility with standard collet chucks and toolholders\u003c\/li\u003e\n\u003cli\u003e3xD drill depth-to-diameter ratio for general-purpose hole depths\u003c\/li\u003e\n\u003cli\u003eFlute length of 52.90 millimeters supports efficient chip flow\u003c\/li\u003e\n\u003cli\u003eLightweight construction at 0.13 pounds for reduced spindle load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with the KenTIP FS replaceable drill tip system. The KTFS toolholder style accepts KenTIP FS series drill tips. Verify tip size and grade selection against the specific workpiece material and hole diameter required for your application.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tip changes should be performed by a qualified machinist or tooling technician following the machine tool manufacturer's lockout and tool-change procedures. Ensure the spindle is fully stopped and the machine is in a safe state before inserting or removing the drill body from the toolholder. Torque the collet nut or set screws to the toolholder manufacturer's specified values using appropriate tooling wrenches. Inspect the tip seat and clamping surfaces for debris or damage before each tip change to maintain runout accuracy.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KenTIP FS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: KTFS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Depth by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 101 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 52.90 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 45.47 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23153308\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6372015\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51742066639154,"sku":"6372015","price":377.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cb9228038cf77186b0ee73ba2392db3c_24b3e851-6a6e-4830-9249-a75c28663636.jpg?v=1788835196","url":"https:\/\/voomisupply.com\/products\/kennametal-6372015-kentip-fs-indexable-drill-body","provider":"Voomi Supply","version":"1.0","type":"link"}