{"product_id":"kennametal-6371065-replaceable-drill-tip-12mm-kcms15","title":"Kennametal 6371065 Replaceable Drill Tip 12mm KCMS15","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 6371065 is a replaceable carbide drill tip designed for use with KTFST-series modular drilling systems. It carries grade KCMS15 fine-grain solid carbide construction with a PVD-applied AlTiN coating, giving it the hardness and thermal resistance needed for demanding hole-making in stainless steel and other difficult-to-machine materials. The tip measures 0.4724 inches (12.00 mm) in cutting diameter and features a 140-degree point angle with an HPL insert geometry optimized for helical, two-flute cutting action. It is held in place via a clamp-style seat size N interface and delivers coolant-through capability to flush chips and control heat at the cutting edge. Machinists and tool-room professionals install this tip as a cost-effective alternative to replacing an entire drill body.\u003c\/p\u003e\n\u003cp\u003eThis replaceable tip is suited for CNC drilling operations in metalworking environments where stainless steel, duplex alloys, and other M-category workpiece materials are common. The coolant-through design makes it appropriate for deep-hole and production-volume drilling where chip evacuation is critical. Specific documented application categories include drilling on inclined exit surfaces and drilling of stacked plates, making it viable for fixture-intensive or aerospace-style setups. The two-flute, two-margin geometry supports stable tracking and hole quality in tight-tolerance work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFine-grain solid carbide construction in grade KCMS15 for wear resistance in stainless and M-grade materials\u003c\/li\u003e\n  \u003cli\u003ePVD AlTiN coating provides thermal barrier and reduces built-up edge in high-heat cutting conditions\u003c\/li\u003e\n  \u003cli\u003e140-degree point angle with HPL geometry for controlled entry and reduced thrust force\u003c\/li\u003e\n  \u003cli\u003eCoolant-through design flushes chips and manages cutting-zone temperature during deep drilling\u003c\/li\u003e\n  \u003cli\u003eTwo-flute, two-margin configuration supports accurate hole tracking and surface finish\u003c\/li\u003e\n  \u003cli\u003eClamp-style seat size N interface for secure seating in compatible KTFST modular drill bodies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with KTFST-series modular drill bodies that accept a size N insert seat. The ISO number for this tip is KTFST12000HPLM. Verify seat size and series compatibility with the drill body before ordering.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machining or toolroom personnel following the drill body manufacturer's clamping torque procedure for the KTFST seat interface. Always index or replace tips with the machine powered down and the spindle locked. Inspect the seat pocket for chips, wear, or damage before seating the new tip, as debris in the pocket can cause runout and premature tip failure. Handle solid carbide tips carefully to avoid chipping the cutting edges during installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.4724 inches (12.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Fine Grain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCMS15\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: HPL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KTFST\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Number\u003c\/strong\u003e: KTFST12000HPLM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel (M)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.2362 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 6.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 9.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length \/ Projection\u003c\/strong\u003e: 0.3362 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02668 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6371065\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51739147829554,"sku":"6371065","price":192.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5316861e4fa58b630d05fcee417e25f4_de169c89-05bc-48bf-9b6f-d9ab2c0717b5.jpg?v=1788810333","url":"https:\/\/voomisupply.com\/products\/kennametal-6371065-replaceable-drill-tip-12mm-kcms15","provider":"Voomi Supply","version":"1.0","type":"link"}