{"product_id":"kennametal-6113266-corner-radius-end-mill-3-4-in-6-flute","title":"Kennametal 6113266 Corner Radius End Mill 3\/4 in 6 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 6113266 is a solid carbide corner radius end mill engineered for finishing operations in demanding materials including steel, stainless steel, superalloys, titanium, and hard materials. The 6-flute, single-end design carries a 0.75 inch mill diameter and a 0.19 inch corner radius, producing controlled edge conditions that reduce chipping on difficult workpiece materials. At 5.5 inches overall length with a 3 inch length of cut, it handles deep-reach finishing passes without sacrificing rigidity. AlTiN PVD coating provides thermal resistance and wear protection at elevated cutting speeds. The submicron carbide grade and UJDE series geometry are matched to right-hand cutting with a close pitch, high-helix configuration suited to aggressive chip evacuation in tough alloys.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for CNC machining centers where precision finishing of steel, stainless steel, superalloys, titanium, and hard material workpieces is required. The straight-cylindrical, 0.75 inch shank fits directly into standard ER collet chucks as well as KENNAMETAL HC hydraulic sleeves in the HC 1\/2 through HC 1-1\/4 inch bore range and HC 20M through HC 32M metric sleeves with inch bores, including HC-HSK Form A holders. The long-length geometry and centercutting capability allow plunge entry and extended-reach side milling in a single tool. Material removal classification is finishing, making it appropriate for final-pass dimensional work and contoured surface profiles.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.19 inch corner radius reduces stress concentration and extends tool life on hardened and abrasive workpieces\u003c\/li\u003e\n  \u003cli\u003e6-flute close-pitch configuration increases feed rates and improves surface finish on finishing passes\u003c\/li\u003e\n  \u003cli\u003eAlTiN PVD coating delivers high-temperature oxidation resistance for dry or near-dry cutting in steel and superalloys\u003c\/li\u003e\n  \u003cli\u003eSubmicron solid carbide grade provides toughness and edge retention across steel, stainless, titanium, and hard material grades\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eHigh-helix, right-hand spiral flutes promote efficient chip evacuation in deep-pocket and long-reach applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with HC 1\/2 through HC 1-1\/4 hydraulic sleeves with inch bores, HC 20M through HC 32M hydraulic sleeves metric with inch bores, and HC-HSK Form A toolholders. The 0.75 inch straight-cylindrical shank also fits standard ER and milling chucks sized for 3\/4 inch shank tooling. Rated for primary workpiece material codes P, M, S, and H covering steel, stainless steel, superalloys and titanium, and hard materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC setup technician following standard toolholder torque and runout verification procedures. Confirm the machine spindle is fully stopped and the control is in E-stop before loading or removing the tool. Verify holder bore cleanliness and shank seating before tightening; contamination in hydraulic or collet holders causes runout that shortens tool life on hard materials. Consult the machine tool builder guidelines and the toolholder manufacturer specifications for clamp force and axial stop position.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.19 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: High\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Close\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: UJDE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 1.22 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6113266\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51743983665458,"sku":"6113266","price":1053.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/469485901ac9af4d30391136db618457_45f36abd-795b-456b-bca2-7d9b8edbe8d3.jpg?v=1788852380","url":"https:\/\/voomisupply.com\/products\/kennametal-6113266-corner-radius-end-mill-3-4-in-6-flute","provider":"Voomi Supply","version":"1.0","type":"link"}