{"product_id":"kennametal-6086570-square-end-mill-3-16-in-4-flute","title":"Kennametal 6086570 Square End Mill 3\/16 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 6086570 is a solid carbide square end mill designed for precision milling in demanding metalworking applications. With a 3\/16 inch mill diameter and 4-flute spiral geometry at a 30-degree helix angle, it delivers efficient chip evacuation and a smooth finish on ferrous materials. The TiAlN coating provides thermal resistance and extended tool life in high-speed cutting conditions. The single-end configuration and right-hand cut with right-hand flute make it a standard choice for CNC machining centers and manual mills operated by machinists and tool-and-die professionals.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for milling steel, stainless steel, and cast iron in both roughing and finishing passes. The centercutting design allows for direct plunge entry, making it versatile for slot milling, profiling, and pocket work. With a 3\/4 inch length of cut and 2-1\/2 inch overall length, it fits standard small-diameter toolholding setups where reach and rigidity are both priorities. The KC633M material grade and TiAlN finish are optimized for harder workpiece materials and elevated cutting speeds without coolant-through requirements.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction in material grade KC633M for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eTiAlN coating for high-temperature performance and extended tool life on ferrous materials\u003c\/li\u003e\n  \u003cli\u003e4-flute spiral geometry with 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge milling without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute for standard CNC and manual mill spindle compatibility\u003c\/li\u003e\n  \u003cli\u003eSingle-end configuration with matched 3\/16 inch shank and mill diameter for minimal runout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for milling steel, stainless steel, and cast iron workpieces. Compatible with standard 3\/16 inch collets and toolholders on CNC machining centers and manual vertical mills. Series 4SE.IS-R-L-X.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist familiar with end mill toolholding and runout specifications. Seat the shank fully in the collet or toolholder and torque the retention hardware per the toolholder manufacturer specifications before operation. Verify spindle direction matches the right-hand cut orientation of this tool before engaging the workpiece. Coolant-through is not supported on this tool; apply flood or mist coolant externally as needed based on the material and feed conditions.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: KC633M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches (2.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 4SE.IS-R-L-X\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 3.35 inches L x 0.51 inches W x 0.51 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.037 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6086570\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51728023748914,"sku":"6086570","price":60.78,"currency_code":"USD","in_stock":true}],"url":"https:\/\/voomisupply.com\/products\/kennametal-6086570-square-end-mill-3-16-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}