{"product_id":"kennametal-6074030-milling-insert-xdpt120515srgp-kc522m","title":"Kennametal 6074030 Milling Insert XDPT120515SRGP KC522M","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 6074030 is a solid carbide milling insert carrying ANSI and ISO designation XDPT120515SRGP in manufacturer grade KC522M. This single-sided, square-shaped insert features a Physical Vapor Deposition (PVD) AlTiN coating that provides thermal resistance and extended tool life in demanding milling applications. The insert measures 0.5000 inches in length and width with a thickness of 0.2188 inches and a corner radius of 0.0590 inches (1.50 mm). It offers four cutting edges per insert, a positive rake geometry, a 9-degree relief angle, and chamfered plus honed cutting edge preparation. Installation is via screw-holding method, and the insert is designed for right-hand orientation.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for face milling, shoulder milling, and high-feed applications across a broad range of workpiece materials including steel, stainless steel, cast iron, superalloys, and titanium. The GP chip breaker geometry supports stable chip formation across these material groups. It is compatible with the Kennametal 7792VXD12 cutter series and is sold individually with a minimum order quantity of 5 units. Machinists, tooling specialists, and CNC operators in job shops, aerospace, and general metalworking environments will find this insert applicable to both roughing and semi-finishing passes where consistent edge performance is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide substrate with PVD AlTiN coating for high thermal stability and wear resistance\u003c\/li\u003e\n  \u003cli\u003eFour cutting edges per insert for maximum utilization and lower cost per edge\u003c\/li\u003e\n  \u003cli\u003ePositive rake geometry with 9-degree relief angle reduces cutting forces on the workpiece\u003c\/li\u003e\n  \u003cli\u003eChamfered and honed cutting edge preparation improves edge strength and surface finish\u003c\/li\u003e\n  \u003cli\u003eGP chip breaker supports reliable chip control across steel, stainless, cast iron, and titanium\u003c\/li\u003e\n  \u003cli\u003eRight-hand, screw-lock design compatible with the 7792VXD12 cutter series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with the Kennametal 7792VXD12 cutter series. Conforms to ANSI and ISO standards under the XDPT120515SRGP designation. Rated for primary workpiece material codes P (steel), M (stainless steel), K (cast iron), and S (superalloys and titanium).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and the tool is secured in the holder before indexing or replacing inserts. Use the appropriate Torx or hex key as specified by the cutter body manufacturer to seat the screw to the cutter body torque requirements. Inspect the insert pocket and seating surface for chips or debris before installing a new insert to prevent seating errors that can affect runout and edge life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: XDPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI \/ ISO Code\u003c\/strong\u003e: XDPT120515SRGP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KC522M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Square\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 9 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Chamfered and Honed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: GP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.2188 inches (7\/32 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0590 inches (1.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 120515\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double Sided\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Series Compatibility\u003c\/strong\u003e: 7792VXD12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1 per package (minimum order quantity: 5)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6074030\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51732964835634,"sku":"6074030","price":190.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/130a9ecfbbd03c0db36ab35ab075dc5a.jpg?v=1788749671","url":"https:\/\/voomisupply.com\/products\/kennametal-6074030-milling-insert-xdpt120515srgp-kc522m","provider":"Voomi Supply","version":"1.0","type":"link"}