{"product_id":"kennametal-5824537-ball-end-mill-0-5-in-4-flute-solid-carbide","title":"Kennametal 5824537 Ball End Mill 0.5 in 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 5824537 is a solid carbide ball end mill from the GOmill 4BN series, designed for demanding milling operations in steel, stainless steel, and cast iron. It features a 0.5 inch cutting diameter, a 1.5 inch length of cut, and a 6 inch overall length with a 0.5 inch straight-cylindrical shank. The four-flute, right-hand helical geometry runs at a 30-degree helix angle and is finished with a TiAlN PVD coating for extended tool life at elevated cutting temperatures. Eccentric relief on the cutting edges increases stability and reduces chatter, while center-cutting capability allows direct plunging and ramping operations. Licensed machinists and CNC tooling specialists are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThe 5824537 is suited for both roughing and finishing passes on ferrous workpieces in vertical and horizontal machining centers. Its standard-length profile and 0.25 inch nose radius make it a practical choice for profiling, contouring, and three-dimensional surface work in steel and cast iron components. The eccentric relief geometry also simplifies reconditioning, making it a cost-effective option in high-volume production environments where tool regrinding programs are in use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction with TiAlN PVD coating for heat resistance in ferrous materials\u003c\/li\u003e\n  \u003cli\u003eEccentric relief increases cutting edge stability for longer tool life and improved surface finish\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design enables plunging and ramping without a pre-drilled entry point\u003c\/li\u003e\n  \u003cli\u003eFour right-hand helical flutes at 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eEccentric relief geometry eases regrinding to lower reconditioning costs\u003c\/li\u003e\n  \u003cli\u003eGOmill 4BN series delivers a balance of performance and cost-effectiveness for production use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for milling steel, stainless steel, and cast iron workpieces. Primary workpiece material codes P, M, and K confirm suitability for these material groups. Compatible with standard 0.5 inch straight-bore tool holders used in CNC machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC tooling technician. The machine spindle must be fully powered down and locked out before changing tooling. Use a clean, properly sized collet or end mill holder to achieve the specified shank diameter tolerance of +0.00000 to -0.00043 inches for accurate runout. Confirm tool projection and reach requirements before tightening to avoid interference with workpiece fixtures.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0020 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: GOmill 4BN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 3.35 inches L x 0.79 inches W x 0.59 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.267 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5824537\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51744495173938,"sku":"5824537","price":280.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7eb984bc37c1fd40c6f6160fdee41a85_052c6934-c191-4d10-8a96-062e13ff1592.jpg?v=1788857368","url":"https:\/\/voomisupply.com\/products\/kennametal-5824537-ball-end-mill-0-5-in-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}