{"product_id":"kennametal-5824430-corner-chamfer-end-mill-1-in-4-flute","title":"Kennametal 5824430 Corner Chamfer End Mill 1 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 5824430 is a solid carbide corner chamfer end mill designed for high-performance material removal in demanding machining environments. Built to the 4CH series standard, it features a 1-inch cutting diameter, 2.25-inch length of cut, and a 45-degree chamfer angle with a 0.0200-inch chamfer width. The TiN\/TiAlN PVD coating, designated KC633M, provides thermal resistance and wear protection during aggressive cuts in steel, stainless steel, cast iron, and non-ferrous metals. The centercutting geometry allows the tool to enter the workpiece axially. Machinists and CNC operators in production shops and job shops are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for milling operations on steel, stainless steel, cast iron, and non-ferrous metals in both roughing and finishing passes. Typical applications include shouldering, slotting, ramp-down entry, helical interpolation, drill milling, and plunging and recessing. The 4-flute, right-hand helical flute configuration at a medium helix angle supports chip evacuation across these varied operations. The Weldon flat shank provides a secure, positive grip in standard milling chucks and toolholders. This tool is single-end and built for use on CNC machining centers and manual mills where chamfer edge prep is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and heat resistance in ferrous and non-ferrous machining\u003c\/li\u003e\n  \u003cli\u003eKC633M TiN\/TiAlN PVD coating extends tool life in steel and stainless steel applications\u003c\/li\u003e\n  \u003cli\u003e45-degree chamfer angle with 0.0200-inch chamfer width for precise edge preparation\u003c\/li\u003e\n  \u003cli\u003eCentercutting design enables axial plunging and helical interpolation entry\u003c\/li\u003e\n  \u003cli\u003eWeldon flat shank provides positive retention in milling toolholders\u003c\/li\u003e\n  \u003cli\u003eSupports shouldering, slotting, ramp-down, drill milling, and recessing in a single tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with standard 1-inch bore milling chucks and Weldon flat toolholders. Designed for use on CNC machining centers processing steel (P), stainless steel (M), cast iron (K), and non-ferrous metal (N) workpiece materials per ISO material group classification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and locked out before installing or removing the tool. Seat the Weldon flat shank fully into the toolholder and tighten the set screw against the flat to prevent axial pullout under load. Verify runout with a dial indicator after installation before beginning a cut, and confirm cutting parameters are appropriate for the workpiece material and operation type.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Width\u003c\/strong\u003e: 0.0200 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Medium (30 degrees)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiN\/TiAlN (KC633M, PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Normal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.040 to -0.073 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.013 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 4CH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Catalog Number\u003c\/strong\u003e: 4CH1000IR225B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.649 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 5.51 inches length x 1.57 inches width x 1.57 inches height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5824430\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51747862806834,"sku":"5824430","price":707.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/08e9d8da12ff20e4858d0575808e1aa5_a42039a0-f5a3-43b0-a47e-0ade2483574b.jpg?v=1788886370","url":"https:\/\/voomisupply.com\/products\/kennametal-5824430-corner-chamfer-end-mill-1-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}