{"product_id":"kennametal-5607206-ball-end-mill-0-5in-6-flute-altin-carbide","title":"Kennametal 5607206 Ball End Mill 0.5in 6 Flute Altin Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 5607206 is a solid carbide ball end mill from the HARVI III UJBE series, designed for high-performance milling in demanding materials including steel, stainless steel, high-temperature alloys, and hardened materials. The tool features a 0.5-inch diameter, a 1.25-inch length of cut, and a 3.0-inch overall length with a straight cylindrical 0.5-inch shank. Six flutes with an unequal (variable index) flute spacing reduce chatter during both roughing and finishing operations. An AlTiN PVD coating provides thermal resistance and extends tool life in high-heat cutting environments. Cutting direction and flute direction are both right-hand.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for CNC machining centers running aggressive toolpaths in ferrous and exotic alloys. The 38-degree medium helix angle promotes chip evacuation while maintaining edge stability in tough workpiece materials. The single-end configuration and centercutting geometry allow plunge entry and full-slot milling. Typical applications include die and mold work, aerospace component machining, and general precision part manufacturing where surface finish and dimensional accuracy are required in both roughing and finishing passes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eVariable index unequal flute spacing reduces chatter for stable cuts at higher feed rates\u003c\/li\u003e\n  \u003cli\u003eAlTiN PVD coating provides oxidation resistance and thermal hardness for steel and high-temp alloy applications\u003c\/li\u003e\n  \u003cli\u003e38-degree medium helix angle supports efficient chip evacuation in deep pockets and slots\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction delivers rigidity and dimensional stability at elevated cutting speeds\u003c\/li\u003e\n  \u003cli\u003eRated for roughing and finishing in a single tool across steel, stainless steel, high-temp alloys, and hardened materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 1\/2-inch straight shank tool holders on CNC machining centers. Primary workpiece material codes P, M, S, and H cover steel, stainless steel, high-temperature alloys, and hardened materials per ISO material classification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified CNC machinists or tool-room technicians. Secure the straight cylindrical shank in a compatible collet or end mill holder, ensuring proper runout before operation. Verify spindle speed, feed rate, and depth of cut against the manufacturer cutting data for the specific workpiece material before initiating a cut. Do not exceed the rated length of cut of 1.25 inches to avoid deflection or tool failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0020 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0043 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HARVI III UJBE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2624 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5607206\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51749596791090,"sku":"5607206","price":409.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c6298d10185cbcf4d65cdc6f22a8a425_43ba0181-e090-4f8e-a613-e143f8a0befa.jpg?v=1788908134","url":"https:\/\/voomisupply.com\/products\/kennametal-5607206-ball-end-mill-0-5in-6-flute-altin-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}