{"product_id":"kennametal-5059672-corner-radius-end-mill-1-2-in-5-flute","title":"Kennametal 5059672 Corner Radius End Mill 1\/2 in 5 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 5059672 is a solid carbide corner radius end mill built for high-demand metal removal in ferrous and difficult-to-machine materials. It features a 1\/2 inch cutting diameter, a 0.03 inch corner radius, and five flutes with a high-helix spiral geometry at 43 degrees. The AlTiN PVD coating provides thermal resistance and wear protection under elevated cutting temperatures. At 4 inches overall length with a 1-1\/2 inch length of cut, this single-end tool is designed for both roughing and finishing passes in the same setup. Submicron carbide grade and extended reach geometry make it suitable for deep-pocket and contour milling applications where tool rigidity and edge life are critical.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in CNC machining centers and milling machines with standard end mill toolholders accepting a 1\/2 inch straight-cylindrical shank. Primary workpiece materials include steel, stainless steel, cast iron, superalloys, titanium, and hard materials. The UGDE series designation indicates an extended-reach profile, making it applicable in die and mold work, aerospace component machining, and general precision milling where a standard-length tool cannot reach the feature. Right-hand cutting direction and right-hand flute spiral are standard for conventional and climb milling strategies.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.03 inch corner radius reduces stress concentrations at the cutting edge and improves surface finish on workpiece corners\u003c\/li\u003e\n  \u003cli\u003eAlTiN PVD coating provides oxidation resistance and extends tool life in dry or minimum-quantity lubrication cutting conditions\u003c\/li\u003e\n  \u003cli\u003e5-flute design increases feed rates compared to 4-flute geometry while maintaining chip clearance in ferrous materials\u003c\/li\u003e\n  \u003cli\u003e43-degree high-helix angle improves chip evacuation and reduces cutting forces in deep-pocket milling\u003c\/li\u003e\n  \u003cli\u003eExtended reach construction allows access to features requiring 1-1\/2 inch depth without tool interference\u003c\/li\u003e\n  \u003cli\u003eSubmicron carbide grade delivers hardness and toughness balance for hard materials and superalloys\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard end mill toolholders accepting a 1\/2 inch straight-cylindrical shank. Rated for primary workpiece materials including steel, stainless steel, cast iron, superalloys, titanium, and hard materials per material codes P, M, K, S, and H.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool changer is in a safe state before mounting or removing the tool. Secure the shank in a compatible end mill holder to the toolholder manufacturer's specified runout and clamping requirements. This end mill is not center-cutting and should not be used for plunge entry directly into solid material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.03 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/2 inches (1.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 43 degrees (High)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Submicron Grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN, PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys, Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: UGDE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.002000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00043 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 11 inches L x 2 inches W x 1.8 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.001 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5059672\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51753112437042,"sku":"5059672","price":360.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3e49de806db2d32ed063fb0cd285506f_7e2e4090-ddb1-46fc-b95d-e92cdfb7afef.jpg?v=1788932907","url":"https:\/\/voomisupply.com\/products\/kennametal-5059672-corner-radius-end-mill-1-2-in-5-flute","provider":"Voomi Supply","version":"1.0","type":"link"}