{"product_id":"kennametal-4171848-wnmg431ff-kcu10-carbide-turning-insert","title":"Kennametal 4171848 WNMG431FF KCU10 Carbide Turning Insert","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 4171848 is a solid carbide turning insert with ANSI designation WNMG431FF and ISO designation WNMG080404FF, designed for precision finishing operations on CNC and manual lathes. Coated with TiAlN via a PVD process, this insert delivers high wear resistance and moderate toughness across a range of workpiece materials. It features an 80-degree trigon (W-shape) geometry, a 0.5 inch inscribed circle, a 0.0156 inch corner radius, and a neutral hand orientation. The FF chip breaker geometry is optimized for finishing cuts. Machinists and CNC programmers in production shops handling steel, stainless steel, cast iron, and superalloys will find this insert well suited to tight-tolerance finishing work.\u003c\/p\u003e\n\u003cp\u003eThe 4171848 is intended for turning, facing, and boring operations on steel (P), stainless steel (M), cast iron (K), aluminum and non-ferrous materials (N), superalloys and titanium (S), and hardened materials (H). It belongs to KENNAMETAL's KENLOC series and is designed for use in standard WNMG-style toolholders that accept clamp and pin insert retention. Typical applications include finish passes on turned components where surface finish and dimensional accuracy are critical. The negative rake and negative side clearance geometry suit high-feed finishing on rigid setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTiAlN coating applied via PVD process for high wear resistance at elevated cutting temperatures\u003c\/li\u003e\n  \u003cli\u003eFF chip breaker geometry engineered for finishing cuts with controlled chip formation\u003c\/li\u003e\n  \u003cli\u003e80-degree trigon insert shape (W) provides 6 usable cutting edges per insert\u003c\/li\u003e\n  \u003cli\u003e0.0156 inch corner radius suited to tight-tolerance finish turning with minimal workpiece stress\u003c\/li\u003e\n  \u003cli\u003eKCU10 grade rated for steel, stainless steel, cast iron, superalloys, and titanium\u003c\/li\u003e\n  \u003cli\u003eCompatible with clamp and pin insert holding methods for secure seating in WNMG toolholders\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI and ISO dimensional standards for interchangeable fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and standard production insert for WNMG-style toolholders accepting a 431 ANSI size code insert. Suitable for use in any rigidly held WNMG clamp-and-pin toolholder system conforming to ANSI and ISO standards for this insert geometry.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInsert replacement should be performed by a qualified machinist or CNC setup technician with the machine fully stopped and the spindle locked out per facility lockout\/tagout procedures. Seat the insert firmly into the toolholder pocket before engaging the clamp or pin to prevent seating errors that can cause insert breakage or poor surface finish. Inspect the insert pocket and clamp for wear or debris before each insert change. Never exceed the maximum depth of cut rating for this insert geometry.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI Insert Code\u003c\/strong\u003e: WNMG431\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Insert Code\u003c\/strong\u003e: WNMG080404\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: WNMG431FF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: WNMG080404FF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: W - Trigon 80 Degree\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 80 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCU10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: FF (Finishing)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0156 inches (1\/64 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1875 inches (3\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.684 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2031 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.2278 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 20 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSide Clearance\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Honed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Pin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Aluminum and Non-Ferrous, Superalloys and Titanium, Hardened Materials\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Turning, Facing, Boring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KENLOC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C3, C4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWiper Edge\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1 insert per package\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 4171848\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51730086560050,"sku":"4171848","price":185.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4201bbfcc2f1de8b1f6dac70da08cf84.jpg?v=1788711529","url":"https:\/\/voomisupply.com\/products\/kennametal-4171848-wnmg431ff-kcu10-carbide-turning-insert","provider":"Voomi Supply","version":"1.0","type":"link"}