{"product_id":"kennametal-4114287-cutoff-insert-kcu25-carbide-3-05mm","title":"Kennametal 4114287 Cutoff Insert KCU25 Carbide 3.05mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 4114287 is a double-ended carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. It carries the style designation A4C0305N00CF02 and is manufactured in the KCU25 grade with a PVD-applied AlTiN coating for extended tool life in demanding cutting conditions. The insert features a 3.05 mm (0.1201 inch) cutting width, a neutral lead angle, and a CF chipbreaker geometry that promotes controlled chip evacuation. At 20.10 mm (0.7913 inch) overall length and 4.01 mm (0.1580 inch) cutting height, it fits clamp-style toolholders in the A4 series insert seat size 3. Machinists and CNC tooling specialists are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for production turning environments where consistent cutoff and grooving performance is required. The double-end configuration extends usable insert life by providing two cutting edges per insert. The AlTiN PVD coating performs well on steels, stainless steels, and cast irons at moderate to high cutting speeds. The 2-degree relief angle and 0.0079 inch corner radius support clean, burr-minimized parting cuts. This product is sold individually but carries a minimum order quantity of 10 units, making it appropriate for shop stock and toolcrib replenishment programs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eKCU25 carbide grade with PVD AlTiN coating for wear resistance in steel and stainless applications\u003c\/li\u003e\n  \u003cli\u003e3.05 mm (0.1201 inch) cutting width with CF chipbreaker for controlled chip flow\u003c\/li\u003e\n  \u003cli\u003eDouble-end insert design provides two usable cutting edges per insert\u003c\/li\u003e\n  \u003cli\u003eNeutral lead angle and 2-degree relief angle for straight, accurate parting cuts\u003c\/li\u003e\n  \u003cli\u003eClamp-style holding method compatible with A4 series toolholders, insert seat size 3\u003c\/li\u003e\n  \u003cli\u003e0.0079 inch corner radius for reduced notch wear at parting groove edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with A4 series clamp-style cutoff and grooving toolholders that accept insert seat size 3. Specific compatible toolholder models were not provided in the available product data; consult KENNAMETAL toolholder specifications or your tooling distributor to confirm fitment before ordering.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC tooling technician. Power down and lock out the machine spindle before seating or replacing inserts. Use the correct clamp screw torque per the toolholder manufacturer's documentation and confirm insert seating is flush before resuming cutting. Do not use damaged or chipped inserts, as improper seating in clamp-style holders can cause insert ejection during operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: A4C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: A4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCU25\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C2, C6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.05 mm (0.1201 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 20.10 mm (0.7913 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Height\u003c\/strong\u003e: 4.01 mm (0.1580 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0079 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 2 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees, Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: CF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 9 inches L x 2.6 inches W x 1.6 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.007 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 4114287\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51745754186034,"sku":"4114287","price":569.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/106f551b99384cc3b97f2454c0f60628.jpg?v=1788865034","url":"https:\/\/voomisupply.com\/products\/kennametal-4114287-cutoff-insert-kcu25-carbide-3-05mm","provider":"Voomi Supply","version":"1.0","type":"link"}