{"product_id":"kennametal-4047724-corner-chamfer-end-mill-0-25in-4-flute","title":"Kennametal 4047724 Corner Chamfer End Mill 0.25in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 4047724 is a solid carbide corner chamfer end mill designed for high-performance material removal in steel, stainless steel, cast iron, and hard materials. Part of the HPHV series, it features a 0.25-inch diameter, a 0.0150-inch chamfer width at a 45-degree chamfer angle, and a four-flute variable geometry that supports both roughing and finishing operations in a single tool. The AlTiN PVD coating extends tool life in high-heat cutting environments. Right-hand flute direction and right-hand cutting action make this a standard drop-in for CNC machining centers and manual mills equipped for centercutting operations. Licensed machinists and tooling specialists working in precision metalworking shops are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for a range of milling operations including shouldering, slotting, rampdown, helical interpolation, drill milling, plunging, and recessing. Its 0.75-inch length of cut and 2.5-inch overall length make it well matched to moderate-depth features in workpiece materials graded P, M, K, and H. The straight-cylindrical shank with a 0.25-inch diameter fits standard collet chucks and end mill holders commonly found in production and job-shop CNC environments. This is a single-end tool, so it is replaced rather than reversed when the cutting end is worn.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction with AlTiN PVD coating for extended tool life in ferrous and hard materials\u003c\/li\u003e\n  \u003cli\u003e45-degree chamfer angle with 0.0150-inch chamfer width for consistent edge break geometry\u003c\/li\u003e\n  \u003cli\u003eVariable flute index with medium helix style reduces chatter and improves chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting design enables plunging and helical interpolation without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eSupports shouldering, slotting, rampdown, drill milling, and recessing in one tool\u003c\/li\u003e\n  \u003cli\u003eMaterial grade KCPM15 optimized for steel, stainless steel, cast iron, and hard material workpieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 0.25-inch collet chucks and end mill holders on CNC machining centers and manual mills. Primary workpiece materials are steel, stainless steel, cast iron, and hard materials corresponding to material codes P, M, K, and H. Catalog reference number HPHV250S4075CH.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and the tool changer or spindle is locked out before inserting or removing the end mill. Seat the straight-cylindrical shank fully into the collet or holder and torque the retention nut according to the toolholder manufacturer specifications. Verify runout at the cutting diameter before beginning a production run to avoid premature tool wear or workpiece damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Width\u003c\/strong\u003e: 0.0150 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: KCPM15\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Variable Index\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Medium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.025 to -0.047 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.009 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HPHV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 4047724\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51754934894898,"sku":"4047724","price":119.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/454daff1be92de084e65e871f16ee1ed.jpg?v=1788949934","url":"https:\/\/voomisupply.com\/products\/kennametal-4047724-corner-chamfer-end-mill-0-25in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}