{"product_id":"kennametal-3769360-dcmt3252fp-carbide-turning-insert","title":"Kennametal 3769360 DCMT3252FP Carbide Turning Insert","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 3769360 is a solid carbide turning insert with an AlTiN (aluminum titanium nitride) PVD coating, designated DCMT3252FP in the ANSI system and DCMT11T308 in the ISO system. It carries the KCU10 grade designation, engineered for high wear resistance across a range from moderate to high demand cutting. The 55-degree diamond (rhombic) insert shape provides a sharp, positive rake geometry with a 7-degree relief angle and a honed cutting edge. With an inscribed circle of 0.375 inches, an insert length of 0.9156 inches (11.63 mm), and a corner radius of 0.0313 inches (1\/32 inch), this insert is sized for precision finishing passes. It mounts via screw-on holding method and offers two usable cutting edges per insert.\u003c\/p\u003e\u003cp\u003eThe 3769360 is suited for finishing operations including turning, facing, boring, back turning, and back boring. The FP chip breaker geometry is optimized for finishing passes at shallow depths of cut, with a maximum depth of cut of 0.050 inches (1.25 mm). Primary workpiece material targets include stainless steel and superalloys and titanium, with additional suitability for steel, cast iron, aluminum, and non-ferrous materials across material codes P, M, K, N, S, and H. The positive side clearance and positive rake design reduce cutting forces and help maintain surface finish quality on demanding materials. This insert is intended for use by machinists and CNC turning specialists in production and job shop environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAlTiN PVD coating provides high wear resistance for extended tool life on stainless steel, superalloys, and titanium\u003c\/li\u003e\n\u003cli\u003e55-degree diamond (DCMT) insert shape with positive rake (15-degree rake angle) reduces cutting forces\u003c\/li\u003e\n\u003cli\u003eFP chip breaker geometry optimized for finishing operations at a maximum depth of cut of 0.050 inches\u003c\/li\u003e\n\u003cli\u003eScrew-on holding method (Clearance Code C, Tolerance Code M) for secure, repeatable seating\u003c\/li\u003e\n\u003cli\u003eTwo cutting edges per insert reduce per-edge tooling cost\u003c\/li\u003e\n\u003cli\u003eMulti-use application compatibility: turning, facing, boring, back turning, and back boring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style screw-on turning insert conforming to ANSI insert code DCMT3252 and ISO insert code DCMT11T308. Compatible with toolholders designed for DCMT-style screw-on inserts with a 0.1732-inch (4.40 mm) mounting hole. Meets ANSI and ISO standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC tooling technicians. Power down and lock out the machine spindle before seating or replacing inserts. Use the correct torque driver for the mounting screw to avoid cracking the carbide substrate — follow the toolholder manufacturer specifications for screw torque. Inspect the insert pocket and seating surface for chips or debris before installation to ensure proper insert orientation and contact.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI Insert Code\u003c\/strong\u003e: DCMT3252\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Insert Code\u003c\/strong\u003e: DCMT11T308\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: D - Diamond (Rhombic) 55 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN (PVD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KCU10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: FP (Finishing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.9156 inches (11.63 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1563 inches (5\/32 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0313 inches (1\/32 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Clearance\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Honed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.050 inches (1.25 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1732 inches (4.40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Stainless Steel, Superalloys and Titanium, Steel, Cast Iron, Aluminum and Non-Ferrous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiper Edge\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C3, C4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1 insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3769360\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51744608321842,"sku":"3769360","price":169.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2d385a8d731fa8a85458b1a767839c5c.jpg?v=1788858957","url":"https:\/\/voomisupply.com\/products\/kennametal-3769360-dcmt3252fp-carbide-turning-insert","provider":"Voomi Supply","version":"1.0","type":"link"}