{"product_id":"kennametal-3747126-indexable-face-mill-4-inch-kshr","title":"Kennametal 3747126 Indexable Face Mill 4 Inch Kshr","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 3747126 is a 4-inch indexable chamfer angle face mill designed for high-performance face milling operations on machining centers and milling machines. Built on the KSHR platform, this cutter accommodates 6 HNGJ 535ANENLD inserts secured by screw-holding for positive insert retention and repeatable edge positioning. The 45-degree chamfer geometry produces a chamfered edge on workpieces in a single pass. Maximum depth of cut is 4.5 mm (0.177 inches), and the cutter supports spindle speeds up to 6300 RPM. Through-coolant capability directs fluid directly to the cutting zone for improved chip evacuation and tool life in demanding applications.\u003c\/p\u003e\n\u003cp\u003eThis face mill suits production machining environments where consistent chamfering and face milling of steel, cast iron, and similar materials is required. The extra-coarse pitch spacing of the 6-flute body reduces cutting forces at higher feed rates, making it appropriate for moderate to heavy material removal on horizontal and vertical machining centers. The right-hand cutting direction and 1-1\/4-inch arbor hole are standard for a wide range of spindle configurations. Licensed machinists and CNC setup technicians are the typical installers and operators of this tooling.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e45-degree chamfer angle produces a chamfered workpiece edge in a single pass\u003c\/li\u003e\n  \u003cli\u003eAccepts 6 HNGJ 535ANENLD inserts with screw-lock holding for secure, repeatable seating\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant design delivers fluid directly to the cutting zone for improved chip control and insert life\u003c\/li\u003e\n  \u003cli\u003eExtra-coarse pitch reduces cutting forces, supporting higher feed rates on rigid setups\u003c\/li\u003e\n  \u003cli\u003eMaximum spindle speed of 6300 RPM suits a broad range of machining center spindles\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with 1-1\/4-inch arbor hole for compatibility with standard milling arbors and adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with HNGJ 535ANENLD inserts. Part of the KSHR series cutter platform. Fits machine spindles and adapters accepting a 1-1\/4-inch arbor hole. Consult KENNAMETAL insert selection guides for grade and coating selection based on workpiece material.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician. Power down and lock out the machine spindle before mounting or removing the cutter body or inserts. Verify arbor and adapter runout with a dial indicator before full-depth cutting passes. Use the correct Torx or hex key driver specified for the insert screw torque to avoid stripping — refer to KENNAMETAL tooling documentation for the applicable fastener specification.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Cutting Diameter\u003c\/strong\u003e: 4 inches (4.0000 inches decimal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Diameter\u003c\/strong\u003e: 4.432 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 4.5 mm (0.177 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArbor Hole Diameter\u003c\/strong\u003e: 1-1\/4 inches (1.2500 inches decimal \/ 31.75 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Inserts \/ Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Insert\u003c\/strong\u003e: HNGJ 535ANENLD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Type\u003c\/strong\u003e: Extra Coarse\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 6300\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHub Diameter\u003c\/strong\u003e: 2.722 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Body Diameter\u003c\/strong\u003e: 4.232 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 1-3\/4 inches (1.750 inches decimal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KSHR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 4.64 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3747126\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51750541852978,"sku":"3747126","price":1515.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d66357544c87bf59225c190beb33a3f3.jpg?v=1788916424","url":"https:\/\/voomisupply.com\/products\/kennametal-3747126-indexable-face-mill-4-inch-kshr","provider":"Voomi Supply","version":"1.0","type":"link"}