{"product_id":"kennametal-3690720-replaceable-drill-tip-1-0630-in-kc7315","title":"Kennametal 3690720 Replaceable Drill Tip 1.0630 in KC7315","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 3690720 is a replaceable drill tip designed for use with KSEM modular drill bodies. It features a 1.0630-inch (27.00 mm) cutting diameter and a 140-degree drill point angle optimized for penetration and chip control. The insert is manufactured from fine-grain solid carbide and carries a PVD-applied TiAlN coating for heat and wear resistance at elevated cutting speeds. Seat size 6 ensures positive location in compatible KSEM holders. Licensed machinists and toolroom technicians install and index these tips as part of modular drill assemblies in production and job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThis drill tip is rated for use across a broad range of workpiece materials including steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium, covering ISO material groups P, M, K, N, and S. The HPG insert geometry supports helical fluting and is suited to through-hole and blind-hole drilling operations on CNC machining centers and drill presses where modular tooling systems are preferred for rapid tip changes without removing the holder from the spindle.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1.0630-inch (27.00 mm) cutting diameter in KSEM series seat size 6\u003c\/li\u003e\n  \u003cli\u003e140-degree point angle for reduced thrust and self-centering entry\u003c\/li\u003e\n  \u003cli\u003eFine-grain solid carbide substrate with PVD TiAlN coating for extended tool life\u003c\/li\u003e\n  \u003cli\u003eHPG insert geometry with 2-flute regular helical configuration\u003c\/li\u003e\n  \u003cli\u003eRated for P, M, K, N, and S ISO workpiece material groups\u003c\/li\u003e\n  \u003cli\u003eClamp-held replaceable tip design enables fast indexing without full tool removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with KSEM modular drill bodies accepting seat size 6 inserts. ISO number KSEMP2700HPGM identifies the insert geometry and seating interface for cross-referencing compatible holders.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or toolroom personnel. Power down and lock out the spindle drive before seating or removing the tip. Use the manufacturer-specified torx or hex key to secure the clamp mechanism — do not overtighten by feel alone; follow the holder manufacturer torque procedure. Inspect the insert pocket and seating surfaces for chips or debris before each tip change to ensure proper seating and runout control.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1.0630 inches (27.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide (Fine Grain)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KC7315\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: HPG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KSEM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Number\u003c\/strong\u003e: KSEMP2700HPGM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.5315 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 13.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Material Groups\u003c\/strong\u003e: P, M, K, N, S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3690720\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51729455087922,"sku":"3690720","price":318.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3552f828f1a0d80a71ef40674c836931.jpg?v=1788704830","url":"https:\/\/voomisupply.com\/products\/kennametal-3690720-replaceable-drill-tip-1-0630-in-kc7315","provider":"Voomi Supply","version":"1.0","type":"link"}