{"product_id":"kennametal-2504012-dvvn-indexable-turning-toolholder","title":"Kennametal 2504012 Dvvn Indexable Turning Toolholder","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 2504012 is a DVVN-style indexable turning toolholder designed for use with VN..33. series inserts in general-purpose CNC and manual lathe turning operations. Built on a 0.75 x 0.75 inch steel shank with a 5-inch overall length, this toolholder is configured for neutral hand orientation and operates with a negative 14-degree rake angle. The Kenclamp insert holding method provides secure clamping during interrupted and continuous cuts. It weighs 0.93 pounds and is suited to shops and toolrooms running standard insert-based turning setups.\u003c\/p\u003e\n\u003cp\u003eThis toolholder fits into typical OD turning stations on turret lathes and CNC turning centers where a 3\/4 inch square shank is the standard interface. The neutral hand configuration allows mounting on either side of a turret or in straight-ahead turning positions. It accepts VN..33. inserts with a 3\/8 inch inscribed circle, making it compatible with the VN.. 332 insert designation. Machinists and toolroom technicians installing this holder will find it suits both production and job-shop turning applications where negative-rake tooling is specified for harder workpiece materials or heavier chip loads.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDVVN toolholder style with neutral hand orientation for versatile turret mounting\u003c\/li\u003e\n  \u003cli\u003eNegative 14-degree rake angle suited to harder materials and heavier interrupted cuts\u003c\/li\u003e\n  \u003cli\u003eKenclamp insert holding method for rigid, repeatable insert seating\u003c\/li\u003e\n  \u003cli\u003eAccepts VN..33. inserts with 3\/8 inch (0.375 inch) inscribed circle\u003c\/li\u003e\n  \u003cli\u003eSteel shank construction provides rigidity and resistance to deflection\u003c\/li\u003e\n  \u003cli\u003eNo coolant-through requirement simplifies setup on standard turning stations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with VN.. 332 inserts (VN..33. series, 3\/8 inch inscribed circle). Fits turning centers and turret lathes accepting a 3\/4 inch square shank toolholder in the DVVN style.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or toolroom technicians. Ensure the lathe or turning center is fully powered down and the turret is locked before mounting or removing the toolholder. Secure the shank in the tool block to the machine manufacturer's specified clamping torque using appropriate hex keys. Verify insert seating and clamp integrity before resuming cutting operations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: DVVN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: -14 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.94 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 0.371 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: VN..33. \/ VN.. 332\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Kenclamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kenclamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.93 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2504012\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51749489934642,"sku":"2504012","price":227.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1d730d10a67dbed1562dbf0b6c736ec6.jpg?v=1788906766","url":"https:\/\/voomisupply.com\/products\/kennametal-2504012-dvvn-indexable-turning-toolholder","provider":"Voomi Supply","version":"1.0","type":"link"}