{"product_id":"kennametal-2383594-milling-insert-sdct1204pdflle-kc410m","title":"Kennametal 2383594 Milling Insert SDCT1204PDFLLE KC410M","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 2383594 is a solid carbide milling insert carrying ISO designation SDCT1204PDFLLE and manufactured grade KC410M. It features a Physical Vapor Deposition (PVD) Titanium Diboride (TiB2) coating optimized for cutting non-ferrous metals. The insert has a square shape with a 90-degree included angle, a 0.0315-inch (0.80 mm) corner radius, and a left-hand orientation. At 0.1875 inches thick and 0.5 inches inscribed circle diameter, it fits standard SDCT-series milling toolholders. Licensed machinists and CNC tooling specialists install this insert in high-speed milling applications where surface finish and tool life on aluminum, copper, and other non-ferrous workpieces are priorities.\u003c\/p\u003e\n\u003cp\u003eThis insert is intended for milling non-ferrous metals in both production and job-shop environments. The TiB2 PVD coating resists built-up edge and maintains sharp cutting geometry at elevated feed rates typical of aluminum machining. The LE chip breaker geometry promotes efficient chip evacuation during high-rake milling passes. The screw-clamp holding method provides positive clamping force, making this insert suitable for indexable milling cutters where repeatability and precise edge positioning are required across multi-insert setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide substrate with PVD Titanium Diboride (TiB2) coating for non-ferrous metal cutting\u003c\/li\u003e\n  \u003cli\u003eSquare insert shape with 90-degree included angle and 0.0315-inch corner radius\u003c\/li\u003e\n  \u003cli\u003eLeft-hand orientation in SDCT series configuration\u003c\/li\u003e\n  \u003cli\u003eLE chip breaker for efficient chip control at high rake angles (20-degree rake)\u003c\/li\u003e\n  \u003cli\u003eScrew-clamp holding method for positive, repeatable clamping in indexable milling bodies\u003c\/li\u003e\n  \u003cli\u003e15-degree relief angle supports free-cutting action on aluminum and other non-ferrous workpieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in SDCT-series indexable milling toolholders requiring a left-hand square insert with a 0.5-inch inscribed circle and screw-clamp holding. Primary workpiece material is non-ferrous metal (ISO material code N).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician. Ensure the milling spindle is fully stopped and the machine is in a safe, locked-out state before indexing or replacing inserts. Use the appropriate Torx or hex key as specified by the toolholder manufacturer when tightening the clamping screw — do not over-torque, as solid carbide inserts are brittle and can crack under excessive clamping force. Inspect the insert pocket for chips or debris before seating a new insert to ensure proper seating and edge alignment.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Designation\u003c\/strong\u003e: SDCT1204PDFLLE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KC410M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Titanium Diboride (TiB2)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Square\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.1875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0315 inches (0.80 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 20 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: LE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1732 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SDCT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0154 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23291601\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2383594\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51727640101170,"sku":"2383594","price":228.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fe31681dd4c33d674e28d70e9b6ae18d.jpg?v=1788680418","url":"https:\/\/voomisupply.com\/products\/kennametal-2383594-milling-insert-sdct1204pdflle-kc410m","provider":"Voomi Supply","version":"1.0","type":"link"}