{"product_id":"kennametal-2238542-replaceable-tip-drill-ksem-20mm","title":"Kennametal 2238542 Replaceable-tip Drill Ksem 20mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 2238542 is a replaceable-tip drill body in the KSEM series, designed for high-productivity metal-cutting operations on CNC machining centers and drill presses. It accepts KSEM0781 insert tips at an insert seat size 2, allowing quick tip changes without removing the body from the spindle. The drill covers a diameter range of 19.84 to 20 mm (0.7811 to 0.7874 inches) and reaches a maximum drill depth of 59.53 mm (2.34 inches), delivering a 3xD depth-to-diameter ratio. Through-coolant delivery via a 3.50 mm (0.138-inch) coolant hole keeps the cutting zone clear of chips and controls heat at the insert tip. This tool body is installed and serviced by machinists and toolroom professionals working in production or job-shop environments.\u003c\/p\u003e\u003cp\u003eThe 2238542 is suited for drilling operations in ferrous and non-ferrous workpiece materials where repeatable hole diameter and depth are critical. The straight-cylindrical shank at 25.40 mm diameter fits standard ER and hydraulic chuck toolholders commonly found on VMCs, HMCs, and turret lathes. With an overall length of 6.25 inches and a flute length of 3.09 inches, the body fits typical tool-magazine envelope requirements. The KSEM platform is designed for high-feed, high-volume drilling in production settings where insert-tip replacement time must be minimized.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAccepts KSEM0781 replaceable insert tips at insert seat size 2 for fast, on-machine tip changes\u003c\/li\u003e\n\u003cli\u003eThrough-coolant capable with a 3.50 mm coolant hole for chip evacuation and heat control\u003c\/li\u003e\n\u003cli\u003e3xD depth-to-diameter ratio supports drilling up to 59.53 mm deep\u003c\/li\u003e\n\u003cli\u003e25.40 mm straight-cylindrical shank for compatibility with standard chuck toolholders\u003c\/li\u003e\n\u003cli\u003e6.25-inch overall length fits standard ATC tool magazine envelopes\u003c\/li\u003e\n\u003cli\u003eKSEM series platform supports consistent, repeatable hole geometry across high-volume runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with KSEM0781 insert tips at insert seat size 2. Part of the KENNAMETAL KSEM series replaceable-tip drill platform. Designed for use with 25.40 mm straight-cylindrical shank toolholders.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tip changes must be performed with the machine spindle fully stopped and all energy sources locked out per OSHA lockout\/tagout procedures. Seat and tip contact surfaces should be cleaned and inspected before seating a new insert tip; debris under the tip can cause runout or premature failure. Confirm through-coolant supply pressure and flow rate are within the toolholder and machine specifications before engaging the cut. Follow the machine tool manufacturer and KENNAMETAL KSEM assembly instructions for correct insert clamping torque using calibrated tooling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Drill Diameter\u003c\/strong\u003e: 19.84 mm (0.7811 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drill Diameter\u003c\/strong\u003e: 20.00 mm (0.7874 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drill Depth\u003c\/strong\u003e: 59.53 mm (2.34 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Depth by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3.09 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 25.40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 3.00 inches (76.20 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Insert Style\u003c\/strong\u003e: KSEM0781\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Hole Diameter\u003c\/strong\u003e: 3.50 mm (0.138 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KSEM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.50 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2238542\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51743300321586,"sku":"2238542","price":584.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/062c11976a3c2f7b4d4cc2b39be45666.jpg?v=1788845307","url":"https:\/\/voomisupply.com\/products\/kennametal-2238542-replaceable-tip-drill-ksem-20mm","provider":"Voomi Supply","version":"1.0","type":"link"}