{"product_id":"kennametal-2047436-carbide-replaceable-tip-drill-1-in","title":"Kennametal 2047436 Carbide Replaceable Tip Drill 1 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 2047436 is a KSEM-series carbide replaceable tip drill designed for high-performance hole-making in steel and similar ferrous workpiece materials. The tip is manufactured from solid carbide in the KC7315 grade, a fine-grain PVD-coated substrate with a TiAlN finish that supports elevated cutting speeds while maintaining edge integrity. The drill cuts a 1-inch (25.40 mm) diameter bore with a 140-degree included point angle, a geometry that promotes self-centering and reduces thrust load at entry. With two helical flutes and a two-margin configuration, chip evacuation and bore finish remain consistent across a wide range of feed rates. The replaceable-tip format lets technicians swap worn inserts at the machine without removing the shank body, reducing downtime in production environments.\u003c\/p\u003e\n\u003cp\u003eThis drill is suited to production machining applications in job shops, manufacturing cells, and toolroom environments where steel is the primary workpiece material (ISO material group P). The KSEM platform is engineered to handle demanding drilling conditions including inclined entry and exit surfaces, stacked-plate setups, and standard through-hole operations. The helical-flute, regular-spiral design supports both dry and wet cutting cycles. The replaceable tip seats into the body using a clamp-style holding method, maintaining concentricity and repeatability across multiple tip changes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide KC7315 fine-grain tip with PVD TiAlN coating for wear resistance in steel\u003c\/li\u003e\n  \u003cli\u003e1-inch (25.40 mm) cutting diameter with 140-degree drill point angle for accurate self-centering entry\u003c\/li\u003e\n  \u003cli\u003eTwo helical flutes with two-margin design for stable chip evacuation and consistent bore quality\u003c\/li\u003e\n  \u003cli\u003eClamp-style insert holding method ensures repeatable tip-to-shank concentricity\u003c\/li\u003e\n  \u003cli\u003eRated for inclined exit surfaces and stacked-plate drilling applications\u003c\/li\u003e\n  \u003cli\u003eReplaceable tip format reduces tool change time and lowers cost-per-hole in production runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with the KENNAMETAL KSEM modular drill body system using insert seat size 5. Primary workpiece material is steel (ISO material group P). Compatible with machining centers and CNC turning equipment equipped to accept the KSEM shank body. Specific machine and holder compatibility should be verified against the KSEM body selection guide prior to ordering.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tip replacement should be performed by a qualified machinist or toolroom technician. Before changing the tip, ensure the spindle is fully stopped and the machine is locked out per your shop lockout\/tagout procedure. Use the manufacturer-specified torque tool and seating procedure for the KSEM clamp mechanism to ensure concentricity and avoid tip damage. Do not exceed the recommended cutting parameters for the workpiece material and grade combination.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1 inch (25.40 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical, Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 13.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length \/ Projection\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KC7315\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Fine Grain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: TiAlN (PVD Process)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KSEM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: HP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (ISO Code P)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Drilling, Inclined Exit, Stacked Plates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Number\u003c\/strong\u003e: KSEM1000HP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0814 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2047436\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51755210703154,"sku":"2047436","price":326.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/01ae107a4518d28100d8563cf4a0b401_cdcb12b9-397c-42f2-906c-3c0555034f1e.jpg?v=1788952230","url":"https:\/\/voomisupply.com\/products\/kennametal-2047436-carbide-replaceable-tip-drill-1-in","provider":"Voomi Supply","version":"1.0","type":"link"}