{"product_id":"kennametal-1913589-solid-carbide-jobber-drill-10-mm","title":"Kennametal 1913589 Solid Carbide Jobber Drill 10 Mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1913589 is a solid carbide jobber-length drill bit with a TiAlN coating, designed for high-performance drilling in demanding production environments. It runs a 10.00 mm diameter with a 140-degree split point geometry and web-thinned tip to reduce thrust and improve self-centering at entry. The straight cylindrical shank measures 10 mm in diameter and 1.5748 inches in length, fitting standard drill chucks and collet holders. Right-hand cutting with a regular spiral flute, this drill is built for machinists, toolroom technicians, and CNC operators who need consistent hole quality at production feed rates. Overall length is 4.0551 inches.\u003c\/p\u003e\u003cp\u003eThis drill is suited for machining steel, stainless steel, cast iron, aluminum, and other non-ferrous materials in both manual and CNC machine tool applications. The TiAlN coating provides oxidation resistance and thermal hardness retention, making it effective in dry or minimal-lubrication cutting conditions. Coolant-through capability supports high-speed deep-hole cycles where chip evacuation and heat management are critical. It conforms to DIN 6537L specification, a standard commonly referenced in precision metalworking and toolroom environments. Typical applications include component drilling in job shops, aerospace fabrication, and general metalworking production.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eTiAlN coating for elevated thermal resistance and extended tool life in steel and stainless applications\u003c\/li\u003e\n\u003cli\u003e140-degree point angle with web-thinned geometry reduces entry thrust and improves centering\u003c\/li\u003e\n\u003cli\u003eCoolant-through design supports chip evacuation in deep-hole drilling cycles\u003c\/li\u003e\n\u003cli\u003eRegular spiral flute with parallel web configuration for consistent chip flow\u003c\/li\u003e\n\u003cli\u003eConforms to DIN 6537L specification for dimensional consistency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style jobber drill conforming to DIN 6537L, compatible with standard drill chucks and collet holders accepting a 10 mm straight cylindrical shank. Rated for use in steel, stainless steel, cast iron, aluminum, and non-ferrous workpiece materials per published attribute data.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by qualified machinists or toolroom technicians familiar with CNC and manual drilling operations. Ensure the machine spindle and workholding are fully secured before engaging the drill. Verify coolant-through supply is active when using this drill in deep-hole applications to prevent chip packing and heat buildup. Inspect the cutting edges for wear or chipping before each use, as carbide tools are brittle and should not be used if the tip shows visible damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 10.00 mm (0.3937 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 103.00 mm (4.0551 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 61.00 mm (2.4016 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 10.00 mm (0.3937 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 40.00 mm (1.5748 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 49.00 mm (1.9291 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Length\u003c\/strong\u003e: 1.70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Parallel Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e: DIN 6537L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: +0.006 to +0.021 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Aluminum and Non-Ferrous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1323 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1913589\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51732486750514,"sku":"1913589","price":250.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/578007a56e9a7667b391e06767201cc2.jpg?v=1788743492","url":"https:\/\/voomisupply.com\/products\/kennametal-1913589-solid-carbide-jobber-drill-10-mm","provider":"Voomi Supply","version":"1.0","type":"link"}