{"product_id":"kennametal-1875166-dwln-indexable-turning-toolholder","title":"Kennametal 1875166 Dwln Indexable Turning Toolholder","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1875166 is a right-hand DWLN-style indexable turning toolholder engineered for negative-rake external turning operations on CNC and manual lathes. Part of the Kennametal Kenclamp series, it features a secure clamp-style insert holding method that locks WN..43. series inserts firmly during interrupted and continuous cuts. The 1.25-inch by 1.25-inch steel shank and 6-inch overall length make it a standard fit for medium-duty lathe tool blocks and turret stations. No coolant-through capability is present, so flood or mist coolant must be directed externally. Weighing 2.78 pounds, the holder is built for rigidity and repeatability across high-volume turning applications.\u003c\/p\u003e\u003cp\u003eThis toolholder is suited for production turning environments where consistent insert positioning and repeatable tool offset are required. The 5-degree lead angle and 1-inch head length position the insert for efficient chip flow on straight turning and facing passes. It is installed by machinists and CNC setup technicians in job shops, production cells, and tool rooms working with steel, cast iron, and similar machinable materials. The Kenclamp clamping system allows fast insert indexing without removing the holder from the turret, reducing changeover time during high-volume runs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRight-hand DWLN toolholder style with negative rake geometry for stable, predictable cutting\u003c\/li\u003e\n\u003cli\u003eKenclamp clamp-style insert retention for secure seating of WN..43. series inserts\u003c\/li\u003e\n\u003cli\u003e1.25 x 1.25 inch steel shank sized for standard lathe tool blocks and VDI turret stations\u003c\/li\u003e\n\u003cli\u003e6-inch overall length with 1-inch head length and 1.5-inch back-of-bar to cutting edge distance\u003c\/li\u003e\n\u003cli\u003e0.5-inch insert inscribed circle accommodates common WN..432 insert geometry\u003c\/li\u003e\n\u003cli\u003eNo coolant-through passages; compatible with external flood or mist coolant delivery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned to accept WN..43. series inserts (complete compatibility: WN.. 432). Verify turret or tool block bore and centerline height match the 1.25 x 1.25 inch shank before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a qualified machinist or CNC setup technician. Power down the machine and engage the spindle lock before removing or seating the holder in the turret or tool block. Torque the clamping screw to the insert manufacturer's specified value using the correct Torx or hex key  -  do not overtighten. After installation, verify tool centerline height and confirm offset values in the control before resuming cutting operations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: DWLN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: WN..43. (Complete: WN.. 432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp (Kenclamp Series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.5 inches (1\/2 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.78 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23153308\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturers Catalog Number\u003c\/strong\u003e: DWLNR L204DKC3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1875166\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":67912799256882,"sku":"1875166","price":205.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a6f32d6a76f0e34df31bcbaacfd591f8.jpg?v=1791239780","url":"https:\/\/voomisupply.com\/products\/kennametal-1875166-dwln-indexable-turning-toolholder","provider":"Voomi Supply","version":"1.0","type":"link"}