{"product_id":"kennametal-1871164-ccmt32505uf-kc5010-turning-insert","title":"Kennametal 1871164 CCMT32505UF KC5010 Turning Insert","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1871164 is a solid carbide turning insert designed for precision finishing operations on CNC lathes and turning centers. It carries the ANSI designation CCMT32505UF and ISO designation CCMT09T302, with a PVD-applied TiAlN coating and KC5010 grade. The insert features an 80-degree diamond (rhombic) shape, a positive rake angle of 5 degrees, and a 7-degree relief angle. With a corner radius of 0.0079 inches and a maximum depth of cut of 0.0492 inches, this insert is engineered for high-precision finishing passes where surface finish and dimensional accuracy are the primary goals. It mounts via screw-on holding method and provides 2 cutting edges per insert.\u003c\/p\u003e\u003cp\u003eThis insert is intended for finishing and light-duty turning, facing, and boring applications on steel, stainless steel, cast iron, superalloys, and titanium (material codes P, M, K, N, S). The UF chip breaker geometry is optimized for light chip loads typical of finishing cuts. The KC5010 grade delivers high wear resistance with moderate toughness, making it well-suited for demanding workpiece materials where tool life consistency is critical. It is installed by machinists, toolroom technicians, and CNC setup personnel in both job shop and production environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePVD TiAlN coating on solid carbide substrate for wear resistance across steel, stainless steel, and cast iron\u003c\/li\u003e\n\u003cli\u003e80-degree diamond insert shape (CCMT) with positive rake and positive side clearance for reduced cutting forces\u003c\/li\u003e\n\u003cli\u003eUF chip breaker geometry optimized for finishing operations with light depth of cut\u003c\/li\u003e\n\u003cli\u003eCorner radius of 0.0079 inches for tight-tolerance surface finish requirements\u003c\/li\u003e\n\u003cli\u003eScrew-on holding method ensures secure, repeatable indexing\u003c\/li\u003e\n\u003cli\u003eMulti-use application: turning, facing, and boring with a single insert style\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CCMT32505-compatible screw-on turning toolholders conforming to ANSI and ISO standards. Verify toolholder pocket geometry and insert seating dimensions before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician with the machine in a powered-off, locked-out state and the spindle fully stopped. Use a calibrated torque wrench appropriate for the toolholder manufacturer's specified clamp screw torque. Inspect the insert pocket and clamp screw for wear or debris before seating the insert. Index or replace the insert at the first sign of chipping, built-up edge, or surface finish degradation to avoid workpiece damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI Insert Code\u003c\/strong\u003e: CCMT32505\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Insert Code\u003c\/strong\u003e: CCMT09T302\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: 80-degree Diamond (Rhombic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KC5010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: UF (Finishing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0079 inches (1\/128 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.3750 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 9.67 mm \/ 0.3808 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1563 inches (5\/32 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Width\u003c\/strong\u003e: 0.3750 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1732 inches (4.40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.0492 inches (1.25 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 5 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Clearance\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Honed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Aluminum, Superalloys and Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C3, C4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0079 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1 insert per package (minimum order quantity: 5)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1871164\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51737069912370,"sku":"1871164","price":213.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/eddc595e36fbc046e7d343e29e236845.jpg?v=1788783866","url":"https:\/\/voomisupply.com\/products\/kennametal-1871164-ccmt32505uf-kc5010-turning-insert","provider":"Voomi Supply","version":"1.0","type":"link"}