{"product_id":"kennametal-1808143-lh-mcln-indexable-turning-toolholder","title":"Kennametal 1808143 Lh Mcln Indexable Turning Toolholder","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1808143 is a left-hand MCLN-style indexable turning toolholder designed for negative rake turning operations on CNC lathes and manual turning centers. It accepts CN..43. series inserts, secured by a clamp and screw holding method for rigid, repeatable insert location. The 3\/4 inch by 3\/4 inch square shank and 4 inch overall length make it a standard-reach holder suited for general OD turning. The 5-degree lead angle and 1\/2 inch insert inscribed circle support controlled chip flow and stable cutting across a range of ferrous and non-ferrous workpiece materials. This toolholder is part of the Kennametal Kenloc series and is built from steel construction for durability under production cutting loads. Licensed machinists and CNC lathe operators are the primary installers.\u003c\/p\u003e\u003cp\u003eThis toolholder fits a wide range of production and job-shop turning applications where a left-hand, negative rake geometry is required. It is appropriate for external OD turning operations on conventional lathes and CNC turning centers with standard rectangular shank tool blocks or turrets. The 3\/4 inch shank height and width match common tool block bore sizes found in shop-standard quick-change and bolt-down turret systems. The 1 inch back-of-bar to cutting edge dimension positions the insert for proper center-height alignment in typical setups.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLeft-hand MCLN toolholder style with 5-degree lead angle for controlled chip direction\u003c\/li\u003e\n\u003cli\u003eNegative rake geometry compatible with CN..43. series inserts (CN.. 432 complete compatibility)\u003c\/li\u003e\n\u003cli\u003eClamp and screw insert holding method provides rigid, repeatable insert seating\u003c\/li\u003e\n\u003cli\u003e3\/4 inch by 3\/4 inch square shank fits standard tool blocks and turret holders\u003c\/li\u003e\n\u003cli\u003eKenloc series steel construction for rigidity under continuous cutting loads\u003c\/li\u003e\n\u003cli\u003eNo coolant-through — suited for external dry or flood-coolant turning setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with CN..43. series indexable inserts; complete insert compatibility is CN.. 432. Intended for left-hand external turning operations in standard rectangular shank turret or quick-change tool block systems accepting a 3\/4 inch shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Power down and lock out the lathe spindle before inserting or changing toolholders in the turret. Secure the shank fully within the tool block to the manufacturer-specified engagement depth using appropriate torque on the clamping screws. Verify center-height alignment using the 1 inch back-of-bar to cutting edge reference before taking a first cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: MCLN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: CN..43.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Insert Compatibility\u003c\/strong\u003e: CN.. 432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 5 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kenloc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.66 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1808143\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51732020822322,"sku":"1808143","price":162.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6308157b5b1a08d2393517705e1128b6.jpg?v=1788738224","url":"https:\/\/voomisupply.com\/products\/kennametal-1808143-lh-mcln-indexable-turning-toolholder","provider":"Voomi Supply","version":"1.0","type":"link"}